CaseIH 9180
The CaseIH 9180 is a tractor produced by Caseih. It is equipped with a 855 ci 14.0 L engine. The listed engine power is Diesel (listed): 375 hp / 279.6 kW. Transmission: 12 forward and 2 reverse. Operating weight: 28000 lbs 12700 kg.
Engine Power
Diesel (listed): 375 hp / 279.6 kW
Fuel & Capacities
250 gal
946.2 L
Transmission
12 forward and 2 reverse
Operating Weight
28000 lbs
12700 kg
Overview
 | 1986 - 1990
9100 SeriesFour-wheel Drive (4WD) tractor
9100 Series
Four-wheel Drive (4WD) tractor |
|---|
Production | |
|---|---|
Manufacturer | CaseIH |
Four-wheel Drive (4WD) tractor | |
Built in Fargo, North Dakota, USA | |
Original price was $128,000 in 1990 | |
CaseIH 9180 Engine | |
|---|---|
Cummins 14.0L 6-cyl diesel | |
Engine details ...  |
CaseIH 9180 Transmission | |
|---|---|
12-speed full power shift | |
Transmission details ...  |
CaseIH 9180 Power | |
|---|---|
Engine | 375 hp
279.6 kW |
PTO (claimed) | 344 hp
256.5 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | outboard planetary |
Steering | hydrostatic power |
Cab standard with air-conditioning. | |
Capacity | |
|---|---|
Fuel | 250 gal
946.2 L |
Hydraulic system | 26 gal
98.4 L |
Hydraulics | |
|---|---|
Type | closed center |
Capacity | 26 gal
98.4 L |
Pressure | 2500 psi
172.4 bar |
Valves | 3 to 4 |
SCV flow | 27 gpm
102.2 lpm |
Total flow | 40 gpm
151.4 lpm |
Tractor hitch | |
|---|---|
Rear Type | IV OptOptional |
Rear lift | 14000 lbs
6350 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent OptOptional |
Rear PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 141.5 inches
359 cm |
Weight | 28000 lbs
12700 kg |
Front tire | 24.5-32 |
Rear tire | 24.5-32 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
4-Wheel Drive Tractors published in 1987, by CaseIH |
Engine
Engine Detail — 855 ci / 14.0 L Diesel
Manufacturer | Cummins NTA-855 |
Configuration | turbocharged aftercooled diesel, 6-cylinder, liquid-cooled inline |
Displacement | 855 ci
14.0 L |
Bore/Stroke | 5.50x6.00 inches
140 x 152 mm |
Power | 375 hp
279.6 kW |
Rated RPM | 2100 |
Torque | 1131 lb-ft
1533.6 Nm |
Torque RPM | 1400 |
Starter volts | 12 |
Oil capacity | 41 qts
38.8 L |
Coolant capacity | 66 qts
62.5 L |
Transmission
Transmission — 12 forward and 2 reverse full power shift
Type | full power shift |
Gears | 12 forward and 2 reverse |
Clutch | hydraulic wet disc |
With 24.5x32 tires. | |
 | |
Dimensions
CaseIH 9180 Tires | |
|---|---|
Ag front | 24.5-32 |
Ag rear | 24.5-32 |
Ag front | 30.5-32 |
Ag rear | 30.5-32 |
Dimensions | |
|---|---|
Wheelbase | 141.5 inches
359 cm |
Length | 281 inches
713 cm |
Width | 96 inches (fenders)
243 cm |
Height (cab) | 139.5 inches
354 cm |
Height (exhaust) | 149.6 inches
379 cm |
Shipping weight | 28000 lbs
12700 kg |
Ground clearance | 19.5 inches
49 cm |
Photos
CaseIH 9180 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Caseih 9180 based on its 375 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁 | Commercial / Field Scale | High horsepower articulated/4WD field plowing. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙 | Commercial / Field Scale | Broad-acre grain tillage for high-drawbar tractors. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih 9180.
Estimated Continuous Field Runtime: 12.8 hrs
Approximately 12.8 hours of continuous field operation at ~75% rated power on a full tank (250 gal / 946.4 L).
Estimated 75% Load Fuel Burn~19.5 gal/hr (73.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Caseih 9180 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Caseih 9180.
Converted Equivalents:
Horsepower (HP)375 hp
Kilowatts (kW)279.6 kW
Metric Horsepower (PS / CV)380.2 PS
Direct Competitor Comparison
Compare CaseIH 9180 against same-era industry alternatives in the same horsepower class.
Current Model
Caseih
CaseIH 9180
Engine Power:Diesel (listed): 375 hp / 279.6 kW
★ Baseline Reference
Related models
CaseIH 4894
- Power:
- 300
- Production years:
- 1984 - 1987
CaseIH 9250
- Power:
- 300
- Production years:
- 1990 - 1995
CaseIH 9260
- Power:
- 300
- Production years:
- 1990 - 1995
CaseIH Optum 300
- Power:
- 300
- Production years:
- 2016 - 2026
CaseIH Magnum 305
- Power:
- 304
- Production years:
- 2008 - 2011