CaseIH Farmall 55C Series II

The CaseIH Farmall 55C Series II is a tractor produced by Caseih. It is equipped with a 115 ci 1.9 L engine. The listed engine power is Diesel (listed): 55 hp / 41.0 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 3770 to 4453 pounds.

Engine Power

Diesel (listed): 55 hp / 41.0 kW

Fuel & Capacities

10.6 gal 40.1 L

Transmission

infinite forward and reverse (3-range)

Operating Weight

3770 to 4453 pounds

Overview

	2017 - Farmall C SeriesCompact Utility tractor
2017 -
Farmall C Series
Compact Utility tractor

Production
Manufacturer	CaseIH
Compact Utility tractor
Original price	$36,310 (2020 shuttle ROPS )
	$43,362 (2020 hydro Cab )

CaseIH Farmall 55C Engine
LS Mtron 1.9L 3-cyl diesel
ROPS Fuel tank	10.6 gal 40.1 L
Cab Fuel tank	12.4 gal 46.9 L
Engine details ...

CaseIH Farmall 55C Power
Engine	55 hp 41.0 kW
Gear PTO (claimed)	46.7 hp 34.8 kW
Hydro PTO (claimed)	44 hp 32.8 kW

Mechanical
Four-wheel drive
Differential lock	mechanical rear
Power steering
Wet multi disc brakes
Two-post folding ROPS. Cab optional with air-conditioning.

Hydraulics
Type	open center
Valves	1 or 2
Pump flow	8.2 gpm 31.0 lpm
Gear Steering flow	4.2 gpm 15.9 lpm
Hydro Steering flow	5.3 gpm 20.1 lpm

Tractor hitch
Rear Type	I
Control	position control
Rear lift (at ends)	2756 lbs 1250 kg
Rear lift (at 24"/610mm)	2469 lbs 1119 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540 (1.375)
Mid PTO	independent OptOptional
Mid PTO Type	2000

Dimensions & Tires
Wheelbase	73.2 inches 185 cm
Weight	3770 to 4453 pounds
Front tire	9.5x16
Rear tire	13.6x24
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	70
Battery volts	12

References

Farmall Compact C Series II published in 2019, by CaseIH

Engine

Engine Detail — 115 ci / 1.9 L Diesel

Manufacturer	LS Mtron L3C19-T
Configuration	turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	115 ci 1.9 L
Bore/Stroke	3.465x4.055 inches 88 x 103 mm
Emissions	Tier IV
Emission control	exhaust gas recirculation with DOC and DPF
Power	55 hp 41.0 kW
Fuel system	electronic direct-injection common rail
Rated RPM	2600
Starter	electric
Starter volts	12

Transmission

Transmission options
16-speed mechanical shuttle
hydrostatic

Transmission — 16 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	16 forward and reverse
Four synchronized speeds in four ranges with mechanical shuttle.

Transmission — infinite forward and reverse (3-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (3-range)

Dimensions

CaseIH Farmall 55C Tires
Standard tires (ag)	Front: 9.5x16. Rear: 13.6x24
Lawn/turf front	28x8.50-15
Lawn/turf rear	41x14.00-20
Industrial front	12-16.5
Industrial rear	17.5Lx24

Dimensions
Wheelbase	73.2 inches 185 cm
Width	69.1 inches 175 cm
Height (ROPS)	98.4 inches 249 cm
Height (cab)	93.3 inches 236 cm
ROPS Weight	3770 lbs 1710 kg
Cab Weight	4453 lbs 2019 kg
Flange rear axle

Attachments

Attachment overview
Front-end loader
Backhoe

CaseIH BHA102 Backhoe
Backhoe type	CaseIH BHA102 Backhoe

Photos

CaseIH Farmall 55C Series II tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 55C Series II based on its 55 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 55C Series II.

Estimated Continuous Field Runtime: 3.7 hrs

Approximately 3.7 hours of continuous field operation at ~75% rated power on a full tank (10.6 gal / 40.1 L).

Estimated 75% Load Fuel Burn~2.9 gal/hr (10.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours