Challenger MT225B
The Challenger MT225B is a tractor produced by Challenger. It is equipped with a 68.5 ci 1.1 L engine. The listed engine power is Diesel (net): 22 hp / 16.4 kW; Diesel (gross): 22.5 hp / 16.8 kW. Transmission: infinite forward and reverse (2-range). Operating weight: 1609 lbs 729 kg.
Engine Power
Diesel (net): 22 hp / 16.4 kW; Diesel (gross): 22.5 hp / 16.8 kW
Fuel & Capacities
6.6 gal
25.0 L
Transmission
infinite forward and reverse (2-range)
Operating Weight
1609 lbs
729 kg
Overview
![]() | 2005 - 2008
MT200B SeriesCompact Utility tractorIseki built
MT200B Series
Compact Utility tractor
Iseki built |
|---|
Production | |
|---|---|
Distributor | Challenger (a part of AGCO) |
Manufacturer | Iseki |
Compact Utility tractor | |
Built in Matsuyama, Japan | |
Variants | |
|---|---|
1523 | similar Massey Ferguson model |
Challenger MT225B Engine | |
|---|---|
Iseki 1.1L 3-cyl diesel | |
Engine details ... |
Challenger MT225B Transmission | |
|---|---|
hydrostatic | |
Transmission details ... |
Challenger MT225B Power | |
|---|---|
Engine (gross) | 22.5 hp
16.8 kW |
Engine (net) | 22 hp
16.4 kW |
PTO (claimed) | 17.6 hp
13.1 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | spur gear |
Differential lock | mechanical rear |
Steering | hydrostatic power |
Wet disc brakes | |
Two-post fixed ROPS. | |
Capacity | |
|---|---|
Fuel | 6.6 gal
25.0 L |
Front diff. | 2.9 qts
2.7 L |
Hydraulics | |
|---|---|
Type | open center |
Pressure | 1990 psi
137.2 bar |
Rear valves | 2 OptOptional |
Mid valves | 2 OptOptional |
Pump flow | 5.5 gpm
20.8 lpm |
Total flow | 8.1 gpm
30.7 lpm |
Steering flow | 2.64 gpm
10.0 lpm |
Steering press. | 1493 psi
102.9 bar |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position and response control |
Rear lift (at ends) | 1190 lbs
539 kg |
Rear lift (at 24"/610mm) | 591 lbs
268 kg |
Rear Arms | fixed link ends |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic wet disc |
Rear PTO Type | 540 (1.375) |
Mid PTO | standard |
Mid PTO Type | 2000 (1.00) |
Dimensions & Tires | |
|---|---|
Wheelbase | 59.8 inches
151 cm |
Weight | 1609 lbs
729 kg |
Front tire | 6-12 |
Rear tire | 9.5-16 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 40 |
Battery CCA | 435 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
MT200B Series published in 2005, by AGCO |
Engine
Engine Detail — 68.5 ci / 1.1 L Diesel
Manufacturer | Iseki E3312 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 68.5 ci
1.1 L |
Bore/Stroke | 3.08x3.07 inches
78 x 78 mm |
Power (net) | 22 hp
16.4 kW |
Power (gross) | 22.5 hp
16.8 kW |
Fuel system | indirect injection |
Air cleaner | dry |
Pre-heating | glow plugs |
Compression | 22.5:1 |
Rated RPM | 2600 |
Idle RPM | 1250-2860 |
Starter volts | 12 |
Oil capacity | 2.9 qts
2.7 L |
Coolant capacity | 7.5 qts
7.1 L |
Transmission
Transmission — infinite forward and reverse (2-range) hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse (2-range) |
Oil capacity | 14.8 qts
14.0 L |
With 9.5-16 R1 rear tires. | |
![]() | |
Dimensions
Challenger MT225B Tires | |
|---|---|
Ag front | 6-12 |
Ag rear | 9.5-16 |
Lawn/turf front | 23x10.50-12 |
Lawn/turf rear | 33x12.50-16.5 |
Industrial front | 23x8.50-12 |
Industrial rear | 12x16.5 |
Dimensions | |
|---|---|
Wheelbase | 59.8 inches
151 cm |
Length | 102 inches
259 cm |
Width | 39.4 inches*Minimum width.
100 cm |
Height (ROPS) | 77 inches
195 cm |
Ground clearance | 10.4 inches
26 cm |
Front axle | Flange: 34.58 inch length
878 mm |
Flange rear axle | 33.62 inch length
853 mm |
Front tread | 35.6 inches
90 cm |
Rear tread | 35.6 inches
90 cm |
Challenger MT225B Weight | |
|---|---|
1609 lbs
729 kg | |
Max capacity | 3086 lbs
1399 kg |
Max front axle | 1433 lbs
650 kg |
Max rear axle | 1653 lbs
749 kg |
Photos
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Challenger MT225B.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Challenger MT225B Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Challenger MT225B.
Converted Equivalents:
Horsepower (HP)0 hp
Kilowatts (kW)0 kW
Metric Horsepower (PS / CV)0 PS
Direct Competitor Comparison
Compare Challenger MT225B against same-era industry alternatives in the same horsepower class.
Current Model
Challenger
Challenger MT225B
Engine Power:Diesel (net): 22 hp / 16.4 kW; Diesel (gross): 22.5 hp / 16.8 kW
★ Baseline Reference
Related models
Challenger MT225
- Power:
- 23.3
- Production years:
- 2003 - 2005
Challenger MT851
- Power:
- 504.2
- Production years:
- 2021 - 2026
Challenger MT856
- Power:
- 556.5
- Production years:
- 2021 - 2026
Challenger MT862
- Power:
- 610.2
- Production years:
- 2021 - 2026
Challenger MT867
- Power:
- 663.8
- Production years:
- 2021 - 2026



