Challenger MT475D

The Challenger MT475D is a tractor produced by Challenger. It is equipped with a 299 ci 4.9 L engine. The listed engine power is Diesel (gross): 130 hp / 96.9 kW. Transmission: Techstar CVT. Operating weight: 12500 lbs 5670 kg.

Engine Power

Diesel (gross): 130 hp / 96.9 kW

Fuel & Capacities

64 gal 242.2 L

Transmission

Techstar CVT

Operating Weight

12500 lbs 5670 kg

Overview

	2014 - 2016 MT400D SeriesUtility tractor MT400D Series Utility tractor

Production
Manufacturer	Challenger (a part of AGCO)
Utility tractor

Variants
6614	similar Massey Ferguson model

Challenger MT475D Engine
AGCO Power 4.9L 4-cyl diesel
Fuel tank	64 gal 242.2 L
Exhaust fluid (DEF)	9.2 gal 34.8 L
Engine details ...

Challenger MT475D Transmission
continuously variable transmission (CVT)
Transmission details ...

Challenger MT475D Power
Engine (gross)	130 hp 96.9 kW
PTO (claimed)	100 hp 74.6 kW
Drawbar (tested)	80.8 hp 60.3 kW
PTO (tested)	123.0 hp 91.7 kW
Performance test details ...

Mechanical
Four-wheel drive
Steering	hydrostatic power
Wet disc brakes
Cab standard with air-conditioning.

Hydraulics
Type	closed center load sensing (CCLS)
	open center optional
Valves	2 to 4
SCV flow	15 gpm (open center) 56.8 lpm
	-unknown-
	29 gpm (CCLS) 109.8 lpm

Tractor hitch
Rear Type	III/II
Control	electronic lower link draft sensing
Rear lift (at 24"/610mm)	11400 lbs 5171 kg
Drawbar	Cat. 2

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
	540/540E/1000
	540/540E/1000/1000E

Dimensions & Tires
Wheelbase	105 inches 266 cm
Weight	12500 lbs 5670 kg
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	240 (2x 120)
	350 (2x 175)
Batteries	2
Battery CCA	600
Battery volts	12

References

Challenger MT400B Series published in 2013, by AGCO
Challenger MT400B Series published in 2014, by AGCO

Engine

Engine Detail — 299 ci / 4.9 L Diesel

Manufacturer	AGCO Power 49AWI
Configuration	turbocharged air-to-air intercooled diesel, 4-cylinder 16-valve, liquid-cooled
Displacement	299 ci 4.9 L
Bore/Stroke	4.251x5.276 inches 108 x 134 mm
Emissions	Interim Tier IV
Emission control	selective catalytic reduction (SCR)
Power (gross)	130 hp 96.9 kW
Fuel system	electronic high pressure common rail
Air cleaner	dual dry element
Pre-heating	thermostart
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission — Techstar CVT

Transmission	Techstar CVT
Type	continuously variable transmission (CVT)
Gears	infinite forward and reverse

Dimensions

Challenger MT475D Tires

Dimensions
Wheelbase	105 inches 266 cm
Shipping weight	12500 lbs 5670 kg
Bar rear axle	3.74 by 90 inches 94 by 2286 mm
Bar rear axle	3.74 by 113 inches 94 by 2870 mm

Tests

OCED Tractor Test 2793
Diesel CVT 4WD August 2013 - September 2013, Link: OCED Tractor Test 2793 file
PTO performance
Max power	123.0 hp 91.7 kW
Fuel use	7.1 gal/hour 26.9 l/hour
Power at rated engine speed	110.0 hp 82.0 kW
Fuel use	6.8 gal/hour 25.7 l/hour
Power at rated PTO speed	118.9 hp 88.7 kW
Fuel use	7.0 gal/hour 26.5 l/hour
Drawbar performance
Max power	80.8 hp 60.3 kW
Fuel use	6.7 gal/hour 25.4 l/hour
Pull at 7.98KPH
Max pull	13715 lbs 6221 kg
Pull at 3.56KPH

Photos

Challenger MT475D tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Challenger MT475D based on its 130 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Challenger MT475D.

Estimated Continuous Field Runtime: 9.5 hrs

Approximately 9.5 hours of continuous field operation at ~75% rated power on a full tank (64 gal / 242.3 L).

Estimated 75% Load Fuel Burn~6.8 gal/hr (25.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours