Challenger MT475E

The Challenger MT475E is a tractor produced by Challenger. It is equipped with a 299 ci 4.9 L engine. The listed engine power is Diesel (listed): 130 hp / 96.9 kW. Transmission: TechStar CVT. Operating weight: 15432 lbs 6999 kg.

Engine Power

Diesel (listed): 130 hp / 96.9 kW

Fuel & Capacities

67 gal 253.6 L

Transmission

TechStar CVT

Operating Weight

15432 lbs 6999 kg

Overview

	2017 - 2020 MT400E SeriesUtility tractor MT400E Series Utility tractor

Production
Manufacturer	Challenger (a part of AGCO)
Utility tractor
Built in France

Variants
6714S	similar Massey Ferguson model

Challenger MT475E Engine
AGCO Power 4.9L 4-cyl diesel
Fuel tank	67 gal 253.6 L
Exhaust fluid (DEF)	7.9 gal 29.9 L
Engine details ...

Challenger MT475E Transmission
continuously-variable transmission
Transmission details ...

Challenger MT475E Power
Engine	130 hp 96.9 kW
PTO (claimed)	120 hp 89.5 kW
Drawbar (tested)	112.4 hp 83.8 kW
PTO (tested)	126.2 hp 94.1 kW
Performance test details ...

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Hydraulic wet disc brakes
Cab standard with air-conditioning. Auto-Guide 3000 ((Optional))

Hydraulics
Type	open center
Valves	up to 5
Pump flow	26 gpm 98.4 lpm
	29 gpmOptOptional 109.8 lpm
	50 gpmOptOptional 189.2 lpm

Tractor hitch
Rear Type	III/II
Rear lift (at 24"/610mm)	11244 lbs 5100 kg
Rear Arms	telescopic link end

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
	540/540E/1000/1000E

Dimensions & Tires
Wheelbase	105 inches 266 cm
Weight	15432 lbs 6999 kg
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	175
	240 *Total charging capacity with optional twin 120A system.
Battery volts	12

References

MT400E Series Tractors published in 2016, by AGCO

Engine

Engine Detail — 299 ci / 4.9 L Diesel

Manufacturer	AGCO Power
Configuration	intercooled turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	299 ci 4.9 L
Bore/Stroke	4.251x5.276 inches 108 x 134 mm
Emissions	Tier IV
Emission control	selective catalytic reduction
Power	130 hp 96.9 kW
Maximum Power	140 hp 104.4 kW
Fuel system	high-pressure common rail direct injection
Rated RPM	2100
Torque	563 lb-ft 763.4 Nm
Torque RPM	1600
Starter	electric
Starter volts	12

Transmission

Transmission — TechStar CVT

Transmission	TechStar CVT
Type	continuously-variable transmission
Gears	infinite forward and reverse

Dimensions

Challenger MT475E Tires

Dimensions
Wheelbase	105 inches 266 cm
Width	72 inches*Minimum width 182 cm
Shipping weight	15432 lbs 6999 kg
Flange rear axle
Bar rear axle

Tests

OCED Tractor Test 3033
Diesel CVT 4WD October 2016 - November 2016, Link: OCED Tractor Test 3033 file
PTO performance
Power at rated engine speed	126.2 hp 94.1 kW
Fuel use	7.7 gal/hour 29.1 l/hour
Power at rated PTO speed	132 hp 98.4 kW
Fuel use	7.9 gal/hour 29.9 l/hour
Drawbar performance
Max power	112.4 hp 83.8 kW
Fuel use	8.2 gal/hour 31.0 l/hour
Pull at 7.45KPH
Max pull	15130 lbs 6862 kg
Pull at 3.52KPH

Photos

Challenger MT475E tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Challenger MT475E based on its 130 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Challenger MT475E.

Estimated Continuous Field Runtime: 9.9 hrs

Approximately 9.9 hours of continuous field operation at ~75% rated power on a full tank (67 gal / 253.6 L).

Estimated 75% Load Fuel Burn~6.8 gal/hr (25.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours