Challenger MT675E
The Challenger MT675E is a tractor produced by Challenger. It is equipped with a 512.6 ci 8.4 L engine. The listed engine power is Diesel (listed): 320 hp / 238.6 kW. Transmission: Techstar CVT. Operating weight: 23810 lbs 10800 kg.
Overview
![]() | 2014 - 2020
MT600E SeriesRow-Crop tractor
MT600E Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Challenger (a part of AGCO) |
Row-Crop tractor | |
Built in Jackson, Minnesota, USA | |
Variants | |
|---|---|
8735 | similar Massey Ferguson model |
Challenger MT675E Engine | |
|---|---|
AGCO POWER 8.4L 6-cyl diesel | |
Fuel tank | 166 gal
628.3 L |
Exhaust fluid (DEF) | 15.8 gal
59.8 L |
Engine details ... | |
Challenger MT675E Transmission | |
|---|---|
continuously variable transmission (CVT) | |
Transmission details ... |
Challenger MT675E Power | |
|---|---|
Engine | 320 hp
238.6 kW |
PTO (claimed) | 275 hp
205.1 kW |
Drawbar (tested) | 258.1 hp
192.5 kW |
PTO (tested) | 314.3 hp
234.4 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | electro-hydraulic |
Steering | hydrostatic power |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. Optional OptiRide Plus hydraulic cab suspension. AgCommand ready; AUTO-GUIDE 3000 | |
Hydraulics | |
|---|---|
Type | closed center load sensing (CCLS) |
Pressure | 2900 psi
200.0 bar |
Valves | 4 to 6 |
Pump flow | 54 gpm
204.4 lpm |
Tractor hitch | |
|---|---|
Rear Type | III/IVN |
Rear lift (at ends) | 26455 lbs
11999 kg |
Drawbar | Cat. 3 |
Cat 3 Heavy Duty (optional) | |
Cat 4 (optional) | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 1000/1000E (1.75) |
Dimensions & Tires | |
|---|---|
Wheelbase | 122 inches
309 cm |
Weight | 23810 lbs
10800 kg |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 240 (twin 120A) |
Charging volts | 12 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
MT600E Series - An MVP on Any Field published in 2014, by AGCO | |
MT600E Series published in 2017, by AGCO |
Engine
Engine Detail — 512.6 ci / 8.4 L Diesel
Manufacturer | AGCO POWER |
Configuration | turbocharged with air-to-air intercooler diesel, 6-cylinder 24-valve, liquid-cooled |
Displacement | 512.6 ci
8.4 L |
Bore/Stroke | 4.37x5.71 inches
111 x 145 mm |
Emissions | Tier IV |
Emission control | selective catalytic reduction (SCR) |
Power | 320 hp
238.6 kW |
Maximum Power | 350 hp
261.0 kW |
Rated RPM | 2100 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — Techstar CVT
Transmission | Techstar CVT |
Type | continuously variable transmission (CVT) |
Gears | infinite forward and reverse (2-range) |
Dimensions
Challenger MT675E Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 122 inches
309 cm |
Length | 218.6 inches
555 cm |
Height (cab) | 141 inches
358 cm |
Shipping weight | 23810 lbs
10800 kg |
Bar rear axle | 4.33 by 105 inches
109 by 2667 mm |
Bar rear axle | 4.33 by 118 inches
109 by 2997 mm |
Tests
OCED Tractor Test 2909 | |
|---|---|
Diesel TechStar CVT 4WD
January 2015 - April 2015,
Link: OCED Tractor Test 2909 file | |
PTO performance | |
Max power | 314.3 hp
234.4 kW |
Fuel use | 17.0 gal/hour
64.3 l/hour |
Power at rated engine speed | 287 hp
214.0 kW |
Fuel use | 16.3 gal/hour
61.7 l/hour |
Power at rated PTO speed | 312.3 hp
232.9 kW |
Fuel use | 17.1 gal/hour
64.7 l/hour |
Drawbar performance | |
Max power | 258.1 hp
192.5 kW |
Fuel use | 17.1 gal/hour
64.7 l/hour |
Pull at 10.42KPH | |
Max pull | 22255 lbs
10094 kg |
Pull at 4.09KPH | |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Challenger MT675E based on its 320 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁 | Commercial / Field Scale | High horsepower articulated/4WD field plowing. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙 | Commercial / Field Scale | Broad-acre grain tillage for high-drawbar tractors. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Challenger MT675E.
Estimated Continuous Field Runtime: 10 hrs
Approximately 10 hours of continuous field operation at ~75% rated power on a full tank (166 gal / 628.4 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
Challenger MT675E Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Challenger MT675E.
Converted Equivalents:
Direct Competitor Comparison
Compare Challenger MT675E against same-era industry alternatives in the same horsepower class.
Challenger MT675E
Related models
Challenger MT655B
- Power:
- 260
- Production years:
- 2005 - 2008
Challenger MT655C
- Power:
- 265
- Production years:
- 2009 - 2010
Challenger MT655D
- Power:
- 265
- Production years:
- 2011 - 2013
Challenger MT655E
- Power:
- 265
- Production years:
- 2014 - 2020
Challenger MT745B
- Power:
- 269
- Production years:
- 2005 - 2008


