Claas Arion 610
The Claas Arion 610 is a tractor produced by Claas. It is equipped with a 414 ci 6.8 L engine. The listed engine power is Diesel (net): 135 hp / 100.7 kW. Transmission: CMATIC EQ 200. Operating weight: 14396 lbs 6530 kg.
Engine Power
Diesel (net): 135 hp / 100.7 kW
Fuel & Capacities
97 gal
367.1 L
Transmission
CMATIC EQ 200
Operating Weight
14396 lbs
6530 kg
Overview
 | 2017 -
Arion 600 SeriesRow-Crop tractor |
|---|---|
2017 - | |
Arion 600 Series | |
Row-Crop tractor | |
Production | |
|---|---|
Manufacturer | Claas |
Row-Crop tractor | |
Claas Arion 610 Engine | |
|---|---|
John Deere 6.8L 6-cyl diesel | |
Fuel tank | 97 gal
367.1 L |
Engine details ...  | |
Claas Arion 610 Power | |
|---|---|
Engine (net) | 135 hp
100.7 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | electro-hydraulic |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | load sensing |
Pressure | 2900 psi
200.0 bar |
Valves | 2 to 4 |
Pump flow | 29.1 gpm
110.1 lpm |
39.6 gpm ((Optional)
149.9 lpm | |
Tractor hitch | |
|---|---|
Rear Type | III |
Rear lift (at 24"/610mm) | 11244 lbs
5100 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | wet disc |
Rear PTO Type | 540/1000 (1.375) |
Front PTO | independent OptOptional |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 111 inches
281 cm |
Weight | 14396 lbs
6530 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
References | |
|---|---|
 | |
Arion published in 2023, by Claas |
Engine
Engine Detail — 414 ci / 6.8 L Diesel
Manufacturer | John Deere |
Configuration | turbocharged intercooled diesel, 6-cylinder, liquid-cooled |
Displacement | 414 ci
6.8 L |
Bore/Stroke | 4.19x5.00 inches
106 x 127 mm |
Rated Power (net) | 135 hp
100.7 kW |
Maximum Power (net) | 145 hp
108.1 kW |
Rated RPM | 2200 |
Torque | 472 lb-ft
640.0 Nm |
Torque RPM | 1500 |
Starter | electric |
Starter volts | 12 |
Oil change | 500 h |
Claas Arion 610 Engine | |
|---|---|
 |
Transmission
Transmission options | |
|---|---|
24-speed six-speed power shift | |
continuously-variable transmission |
Transmission — Hexashift
Transmission | Hexashift |
Type | six-speed power shift |
Gears | 24 forward and reverse |
Six power shift gears in four ranges with power shuttle. | |
With 20.8R38 rear tires and 50 kph option. | |
 | |
Claas Arion 610 Transmission | |
|---|---|
 |
Transmission — CMATIC EQ 200
Transmission | CMATIC EQ 200 |
Type | continuously-variable transmission |
Gears | infinite forward and reverse |
Claas Arion 610 Transmission | |
|---|---|
 |
Dimensions
Claas Arion 610 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 111 inches
281 cm |
Length | 187.4 inches
475 cm |
Height | 120.1 inches
305 cm |
Operating weight | 14396 lbs
6530 kg |
Max weight | 22597 lbs
10249 kg |
Photos
Claas Arion 610 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Claas Arion 610 based on its 135 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Claas Arion 610.
Estimated Continuous Field Runtime: 13.8 hrs
Approximately 13.8 hours of continuous field operation at ~75% rated power on a full tank (97 gal / 367.2 L).
Estimated 75% Load Fuel Burn~7 gal/hr (26.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Claas Arion 610 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Claas Arion 610.
Converted Equivalents:
Horsepower (HP)135 hp
Kilowatts (kW)100.7 kW
Metric Horsepower (PS / CV)136.9 PS
Direct Competitor Comparison
Compare Claas Arion 610 against same-era industry alternatives in the same horsepower class.
Current Model
Claas
Claas Arion 610
Engine Power:Diesel (net): 135 hp / 100.7 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 1246
Engine Power:122
Production Years:1972 - 1980
Related models
Claas Ares 567
- Power:
- 108.5
- Production years:
- 2005 - 2007
Claas Ares 617
- Power:
- 108.5
- Production years:
- 2005 - 2007
Claas Arion 430
- Power:
- 110
- Production years:
- 2009 - 2024
Claas 566
- Power:
- 114
- Production years:
- 2003 - 2005
Claas 616
- Power:
- 115
- Production years:
- 2003 - 2005