Claas Arion 660

The Claas Arion 660 is a tractor produced by Claas. It is equipped with a 414 ci 6.8 L engine. The listed engine power is Diesel (net): 175 hp / 130.5 kW. Transmission: CMATIC EQ 220. Operating weight: 17328 lbs 7859 kg.

Engine Power
Diesel (net): 175 hp / 130.5 kW
Fuel & Capacities
97 gal 367.1 L
Transmission
CMATIC EQ 220
Operating Weight
17328 lbs 7859 kg

Overview

Claas Arion 660 tractor photo
2017 - Arion 600 SeriesRow-Crop tractor
2017 -
Arion 600 Series
Row-Crop tractor
Production
Manufacturer
Claas
Row-Crop tractor
Claas Arion 660 Engine
John Deere 6.8L 6-cyl diesel
Fuel tank
97 gal 367.1 L
Engine details ...
Claas Arion 660 Transmission
continuously-variable transmission
Transmission details ...
Claas Arion 660 Power
Engine (net)
175 hp 130.5 kW
Mechanical
Four-wheel drive
Differential lock
electro-hydraulic
Power steering
Hydraulic wet disc brakes
Cab standard with air-conditioning.
Hydraulics
Type
load sensing
Pressure
2900 psi 200.0 bar
Valves
2 to 4
Pump flow
29.1 gpm 110.1 lpm
39.6 gpm ((Optional) 149.9 lpm
Tractor hitch
Rear Type
III
Rear lift (at 24"/610mm)
11244 lbs 5100 kg
Power Take-off (PTO)
Rear PTO
independent
Clutch
wet disc
Rear PTO Type
540/1000 (1.375)
Front PTO
independent OptOptional
Front PTO Type
1000
Dimensions & Tires
Wheelbase
111 inches 281 cm
Weight
17328 lbs 7859 kg
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Battery volts
12
References
Arion 660 references literature
Arion published in 2023, by Claas

Engine

Engine Detail — 414 ci / 6.8 L Diesel

Manufacturer
John Deere
Configuration
turbocharged intercooled diesel, 6-cylinder, liquid-cooled
Displacement
414 ci 6.8 L
Bore/Stroke
4.19x5.00 inches 106 x 127 mm
Rated Power (net)
175 hp 130.5 kW
Maximum Power (net)
185 hp 138.0 kW
205 hp (Boost) 152.9 kW
Rated RPM
2200
Torque
626 lb-ft 848.9 Nm
Torque RPM
1500
Starter
electric
Starter volts
12
Oil change
500 h
Claas Arion 660 Engine
Claas Arion 660 engine image

Transmission

Transmission — CMATIC EQ 220

Transmission
CMATIC EQ 220
Type
continuously-variable transmission
Gears
infinite forward and reverse
Claas Arion 660 Transmission
Claas Arion 660 transmission image

Dimensions

Claas Arion 660 Tires
Dimensions
Wheelbase
111 inches 281 cm
Length
189.7 inches 481 cm
Height
120.1 inches 305 cm
Operating weight
17328 lbs 7859 kg
Max weight
27558 lbs 12500 kg

Photos

Claas Arion 660 tractor photo

Claas Arion 660 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Claas Arion 660 based on its 175 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
5 to 7 Bottom (18")5 - 7 铧 (45 cm)Commercial / Field ScaleLarge acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing
15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼Commercial / Field ScaleLarge commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙Commercial / Field ScaleWide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage
Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)Commercial / Field ScaleHigh-capacity commercial forage harvesting (1000 RPM PTO).
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Claas Arion 660.

Estimated Continuous Field Runtime: 10.7 hrs

Approximately 10.7 hours of continuous field operation at ~75% rated power on a full tank (97 gal / 367.2 L).

Estimated 75% Load Fuel Burn~9.1 gal/hr (34.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Claas Arion 660 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Claas Arion 660.

Converted Equivalents:

Horsepower (HP)175 hp
Kilowatts (kW)130.5 kW
Metric Horsepower (PS / CV)177.4 PS

Direct Competitor Comparison

Compare Claas Arion 660 against same-era industry alternatives in the same horsepower class.

Current Model
Claas

Claas Arion 660

Engine Power:Diesel (net): 175 hp / 130.5 kW
★ Baseline Reference
New HollandMarket Competitor

New Holland T7530

Engine Power:157.8
Production Years:2007 - 2017
DeereMarket Competitor

Deere 4450

Engine Power:158.2
Production Years:1983 - 1988
Deutz-FahrMarket Competitor

Deutz-Fahr Agrotron 150

Engine Power:158.2
Production Years:2005 - 2007
YTOMarket Competitor

YTO 1604

Engine Power:157.7