Craftsman 917.20390 T3000
The Craftsman 917.20390 T3000 is a tractor produced by Craftsman Lawn Tractors. It is equipped with a 724 cc 44.18 ci engine. The listed engine power is Gasoline (gross): 22 hp / 16.4 kW. Transmission: infinite forward and reverse.
Engine Power
Gasoline (gross): 22 hp / 16.4 kW
Fuel & Capacities
3 gal
11.4 L
Transmission
infinite forward and reverse
Overview
 | 2014
T3000 SeriesLawn tractorHusqvarna built
T3000 Series
Lawn tractor
Husqvarna built |
|---|
Production | |
|---|---|
Distributor | Craftsman (a part of Sears) |
Manufacturer | Husqvarna |
Lawn tractor | |
Original price was $2000 in 2014 | |
Craftsman 917.20390 Engine | |
|---|---|
22HP Briggs & Stratton 724cc 2-cyl gasoline | |
Fuel tank | 3 gal
11.4 L |
Engine details ...  | |
Craftsman 917.20390 Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
Mechanical | |
|---|---|
Two-wheel drive | |
Steering | manual |
Open operator station. | |
Power Take-off (PTO) | |
|---|---|
Front PTO | independent |
Clutch | electric |
Dimensions & Tires | |
|---|---|
Wheelbase | 48 inches
121 cm |
Front tire | 15X6-6 |
Rear tire | 20X8-8 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging amps | 15 |
Battery CCA | 230 |
Battery volts | 12 |
Battery AH | 28 |
Battery Group | U1R |
Engine
Engine Detail — 724 cc / 44.18 ci Gasoline
Fuel Type | Gasoline |
Configuration | 2-cylinder 4-valve, air-cooled vertical-shaftV-Twin |
Briggs & Stratton Intek Platinum | |
Displacement | 724 cc
44.18 ci |
Bore/Stroke | 3.12x2.89 inches
79 x 73 mm |
Power (gross) | 22 hp
16.4 kW |
Starter | electric |
Starter volts | 12 |
Sparkplug | Champion RC12YC |
Sparkplug gap | 0.030 inches
0.762 mm |
Oil capacity | 2 qts
1.9 L |
Oil change | 50 h |
Transmission
Transmission — infinite forward and reverse belt-driven hydrostatic
Type | belt-driven hydrostatic |
Gears | infinite forward and reverse |
Oil change | sealed unit, owner service is not recommended |
 | |
Dimensions
Craftsman 917.20390 Tires | |
|---|---|
Lawn/turf front | 15X6-6 |
Lawn/turf rear | 20X8-8 |
Dimensions | |
|---|---|
Wheelbase | 48 inches
121 cm |
Length | 72.75 inches
184 cm |
Width | 45 inches
114 cm |
Height | 46 inches
116 cm |
Front axle | Cast-iron |
Attachments
Attachment overview | |
|---|---|
42" mid-mount mower deck | |
Snowblower | |
Blade |
42" Mower deck | |
|---|---|
Type | mid-mount Craftsman |
2-blade with manual lift | |
Cutting width | 42 inches
106 cm |
Cut height | 1 to 4 inch
2 to 10 cm |
Cut positions | 6 |
Photos
Craftsman 917.20390 T3000
Recommended Implements & Sizing Guide
Engineering recommendations for Craftsman Lawn Tractors Craftsman 917.20390 T3000 based on its 22 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Craftsman Lawn Tractors Craftsman 917.20390 T3000.
Estimated Continuous Field Runtime: 2.6 hrs
Approximately 2.6 hours of continuous field operation at ~75% rated power on a full tank (3 gal / 11.4 L).
Estimated 75% Load Fuel Burn~1.1 gal/hr (4.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Craftsman Lawn Tractors Craftsman 917.20390 T3000 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Craftsman Lawn Tractors Craftsman 917.20390 T3000.
Converted Equivalents:
Horsepower (HP)22 hp
Kilowatts (kW)16.4 kW
Metric Horsepower (PS / CV)22.3 PS
Direct Competitor Comparison
Compare Craftsman 917.20390 T3000 against same-era industry alternatives in the same horsepower class.
Current Model
Craftsman Lawn Tractors
Craftsman 917.20390 T3000
Engine Power:Gasoline (gross): 22 hp / 16.4 kW
★ Baseline Reference
Related models
Craftsman lawn tractors 107.27770
- Power:
- 18
- Production years:
- 2004 - 2004
Craftsman lawn tractors 502.25376
- Power:
- 18
- Production years:
- 1984 - 1984
Craftsman lawn tractors 502.60218
- Power:
- 18
- Production years:
- 1982 - 1982
Craftsman lawn tractors 502.60730
- Power:
- 18
- Production years:
- 1981 - 1981
Craftsman lawn tractors 917.25048
- Power:
- 18
- Production years:
- 1995 - 1995