Denning E 10-18
The Denning E 10-18 is a tractor produced by Denning. It is equipped with a 202 ci 3.3 L engine. Transmission: 6 forward and reverse. Operating weight: 3600 lbs 1632 kg.
Fuel & Capacities
15 gal
56.8 L
Transmission
6 forward and reverse
Operating Weight
3600 lbs
1632 kg
Overview
 | 1916 - 1918
Standard-tread tractor |
|---|
Production | |
|---|---|
Manufacturer | Denning |
Standard-tread tractor | |
Built in Cedar Rapids, Iowa, USA | |
Denning E Engine | |
|---|---|
Waukseha 3.3L 4-cyl gasoline | |
Fuel tank | 15 gal
56.8 L |
Aux. fuel | 5 gal
18.9 L |
Engine details ...  | |
Denning E Transmission | |
|---|---|
6-speed friction disc | |
Transmission details ...  |
Denning E Power | |
|---|---|
Drawbar (claimed) | 10 hp
7.5 kW |
Belt (claimed) | 18 hp
13.4 kW |
Plows | 2 |
Mechanical | |
|---|---|
Two-wheel drive | |
Manual steering | |
Open operator station. |
Dimensions & Tires | |
|---|---|
Weight | 3600 lbs
1632 kg |
Rear tire | 46x10 |
Full dimensions and tires ...  | |
Belt Pulley | |
|---|---|
Diameter | 10 inches
25 cm |
Width | 6 inches
15 cm |
Engine
Engine Detail — 202 ci / 3.3 L Gasoline
Manufacturer | Waukseha |
Fuel Type | Gasoline |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 202 ci
3.3 L |
Bore/Stroke | 3.50x5.25 inches
89 x 133 mm |
Rated RPM | 1200 |
Coolant capacity | 28 qts
26.5 L |
Transmission
Transmission — 6 forward and reverse friction disc
Type | friction disc |
Gears | 6 forward and reverse |
Dimensions
Denning E Tires | |
|---|---|
Ag rear | 46x10 steel |
Dimensions | |
|---|---|
Length | 120 inches
304 cm |
Width | 56 inches
142 cm |
Height | 61 inches
154 cm |
Weight | 3600 lbs
1632 kg |
Photos
Denning E 10-18 tractor photo
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Denning E 10-18.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Denning E 10-18 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Denning E 10-18.
Converted Equivalents:
Horsepower (HP)0 hp
Kilowatts (kW)0 kW
Metric Horsepower (PS / CV)0 PS