Deutz-Fahr D 4507
The Deutz-Fahr D 4507 is a tractor produced by Deutz Fahr. It is equipped with a 172.50 ci 2.8 L engine. The listed engine power is Diesel (listed): 40 hp / 29.8 kW. Transmission: 8 forward and 2 reverse. Operating weight: 4674 to 5247 pounds.
Engine Power
Diesel (listed): 40 hp / 29.8 kW
Fuel & Capacities
18.5 gal
70.0 L
Transmission
8 forward and 2 reverse
Operating Weight
4674 to 5247 pounds
Overview
 | 1980 - 1990
07 SeriesUtility tractor
07 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Utility tractor | |
Deutz-Fahr D 4507 Engine | |
|---|---|
Deutz 2.8L 3-cyl diesel | |
Fuel tank | 18.5 gal
70.0 L |
Engine details ...  | |
Deutz-Fahr D 4507 Transmission | |
|---|---|
8-speed | |
Transmission details ...  |
Deutz-Fahr D 4507 Power | |
|---|---|
Engine | 40 hp
29.8 kW |
Drawbar (tested) | 35.47 hp
26.4 kW |
PTO (tested) | 43.15 hp
32.2 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Drum brakes | |
Four-post ROPS. |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 9.2 gpm
34.8 lpm |
Tractor hitch | |
|---|---|
Rear lift | 4189 lbs
1900 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 |
Engine RPM | 540@2070 |
Dimensions & Tires | |
|---|---|
Wheelbase | 81.10 inches
205 cm |
Weight | 4674 to 5247 pounds |
Front tire | 7.50-16 |
Rear tire | 14.9-28 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 172.50 ci / 2.8 L Diesel
Manufacturer | Deutz |
Fuel Type | Diesel |
Configuration | 3-cylinder, air-cooled |
Displacement | 172.50 ci
2.8 L |
Bore/Stroke | 3.94x4.72 inches
100 x 120 mm |
Power | 40 hp
29.8 kW |
Rated RPM | 2300 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 8 forward and 2 reverse
Gears | 8 forward and 2 reverse |
Dimensions
Deutz-Fahr D 4507 Tires | |
|---|---|
Ag front | 7.50-16 |
7.50-18 (4WD) | |
Ag rear | 14.9-28 |
Dimensions | |
|---|---|
Wheelbase | 81.10 inches
205 cm |
Length | 137.40 inches
348 cm |
Height | 92.91 inches
235 cm |
Deutz-Fahr D 4507 Weight | |
|---|---|
2WD | 4674 lbs
2120 kg |
4WD | 5247 lbs
2380 kg |
Ballasted | 7390 lbs*Two-wheel drive with rear liquid and iron, plus front iron.
3352 kg |
Tests
Nebraska Tractor Test 1219 | |
|---|---|
Diesel 8-speed 2WD
September 3 - 15, 1976
Link: Nebraska Tractor Test 1219 file | |
PTO performance | |
Power at rated engine speed | 43.15 hp
32.2 kW |
Fuel use | 2.5 gal/hour
9.5 l/hour |
Power at rated PTO speed | 42.17 hp
31.4 kW |
Fuel use | 2.3 gal/hour
8.7 l/hour |
Drawbar performance | |
Max power | 35.47 hp
26.4 kW |
Fuel use | 2.4 gal/hour
9.1 l/hour |
Gear 4L used for power test. | |
Max pull | 5472 lbs
2482 kg |
Gear 2L used for pull test. | |
Photos
Deutz-Fahr D 4507 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr D 4507 based on its 40 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr D 4507.
Estimated Continuous Field Runtime: 8.9 hrs
Approximately 8.9 hours of continuous field operation at ~75% rated power on a full tank (18.5 gal / 70 L).
Estimated 75% Load Fuel Burn~2.1 gal/hr (7.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr D 4507 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr D 4507.
Converted Equivalents:
Horsepower (HP)40 hp
Kilowatts (kW)29.8 kW
Metric Horsepower (PS / CV)40.6 PS
Direct Competitor Comparison
Compare Deutz-Fahr D 4507 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr D 4507
Engine Power:Diesel (listed): 40 hp / 29.8 kW
★ Baseline Reference
Related models
Deutz-Fahr D 3607
- Power:
- 34
- Production years:
- 1982 - 1988
Deutz-Fahr Agrokid 30
- Power:
- 34.8
- Production years:
- 2003 - 2006
Deutz-Fahr Agrokid 35
- Power:
- 34.9
- Production years:
- 1997 - 2002
Deutz-Fahr D 4007
- Power:
- 35
- Production years:
- 1980 - 1984
Deutz-Fahr Agrokid 210
- Power:
- 38.2
- Production years:
- 2007 - 2017