Deutz-Fahr DX 110
The Deutz-Fahr DX 110 is a tractor produced by Deutz Fahr. It is equipped with a 344.9 ci 5.7 L engine. The listed engine power is Diesel (listed): 102 hp / 76.1 kW. Transmission: 15 forward and 5 reverse. Operating weight: 10297 lbs 4670 kg.
Engine Power
Diesel (listed): 102 hp / 76.1 kW
Fuel & Capacities
31.7 gal
120.0 L
Transmission
15 forward and 5 reverse
Operating Weight
10297 lbs
4670 kg
Overview
 | 1978 - 1983
DX SeriesRow-Crop tractor
DX Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Row-Crop tractor | |
Variants | |
|---|---|
DX 110 | 2WD |
DX 110A | 4WD |
Deutz-Fahr DX 110 Engine | |
|---|---|
Deutz 5.7L 6-cyl diesel | |
Fuel tank | 31.7 gal
120.0 L |
Engine details ...  | |
Deutz-Fahr DX 110 Transmission | |
|---|---|
15-speed | |
Transmission details ...  |
Deutz-Fahr DX 110 Power | |
|---|---|
Engine | 102 hp
76.1 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Dry disc brakes |
Hydraulics | |
|---|---|
Type | open center |
Pressure | 2485 psi
171.3 bar |
Pump flow | 14.8 gpm
56.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 9603 lbs
4355 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | wet disc |
Rear PTO Type | 540/1000 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 105.9 inches
268 cm |
Weight | 10297 lbs
4670 kg |
Front tire | 10.00-16 |
Rear tire | 18.4-38 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 344.9 ci / 5.7 L Diesel
Manufacturer | Deutz F6L 912 |
Fuel Type | Diesel |
Configuration | 6-cylinder, air-cooled |
Displacement | 344.9 ci
5.7 L |
Bore/Stroke | 3.94x4.72 inches
100 x 120 mm |
Power | 102 hp
76.1 kW |
Rated RPM | 2300 |
Transmission
Transmission — 15 forward and 5 reverse
Gears | 15 forward and 5 reverse |
Clutch | dry disc |
Dimensions
Deutz-Fahr DX 110 Tires | |
|---|---|
2WD Ag front | 10.00-16 |
4WD Ag front | 14.9-24 |
Ag rear | 18.4-38 |
Dimensions | |
|---|---|
Wheelbase | 105.9 inches
268 cm |
Length | 175.6 inches
446 cm |
Height | 107.1 inches
272 cm |
2WD 11245 4WD} Weight | 10297 lbs
4670 kg |
Photos
Deutz-Fahr DX 110
Deutz-Fahr DX 110
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr DX 110 based on its 102 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr DX 110.
Estimated Continuous Field Runtime: 6 hrs
Approximately 6 hours of continuous field operation at ~75% rated power on a full tank (31.7 gal / 120 L).
Estimated 75% Load Fuel Burn~5.3 gal/hr (20.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr DX 110 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr DX 110.
Converted Equivalents:
Horsepower (HP)102 hp
Kilowatts (kW)76.1 kW
Metric Horsepower (PS / CV)103.4 PS
Direct Competitor Comparison
Compare Deutz-Fahr DX 110 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr DX 110
Engine Power:Diesel (listed): 102 hp / 76.1 kW
★ Baseline Reference
Related models
Deutz-Fahr 4.51
- Power:
- 82
- Production years:
- 1989 - 1995
Deutz-Fahr 4.85
- Power:
- 82
- Production years:
- 1995 - 1997
Deutz-Fahr Agrotron 85 MK3
- Power:
- 82
- Production years:
- 2001 - 2003
Deutz-Fahr DX 86
- Power:
- 82
- Production years:
- 1982 - 1983
Deutz-Fahr 4090E
- Power:
- 82.6
- Production years:
- 2018 - 2026