deutz fahr dx 3 70
 | 1985 - 1989
DX 3 SeriesUtility tractor | 1985 - 1989 | DX 3 Series | Utility tractor |
|---|---|---|---|---|
1985 - 1989 | ||||
DX 3 Series | ||||
Utility tractor | ||||
1985 - 1989 | |
|---|---|
DX 3 Series | |
Utility tractor |
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Utility tractor | |
Built in Germany | |
Deutz-Fahr DX 3.70 Engine | |
|---|---|
Deutz 3.8L 4-cyl diesel | |
Engine details ...  |
Deutz-Fahr DX 3.70 Transmissions | |
|---|---|
12-speed partially synchronized | |
24-speed two-speed power shift | |
Transmission details ...  |
Deutz-Fahr DX 3.70 Power | |
|---|---|
Engine | 70 hp
52.2 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | mechanical rear |
Power steering | |
Hydraulic drum brakes | |
Four-post ROPS with canopy. StarCab optional. | |
Photos | |
|---|---|
 | |
Deutz-Fahr DX 3.70 photos...  |
Capacity | |
|---|---|
ROPS Fuel | 23 gal
87.1 L |
Cab Fuel | 22.5 gal
85.2 L |
Hydraulic system | 4 gal
15.1 L |
| 7.5 galOptOptional
28.4 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 4 gal
15.1 L |
| 7.5 galOptOptional
28.4 L |
Pressure | 2538 psi
175.0 bar |
Rear valves | 1 to 3 |
Front valves | 2 OptOptional |
Pump flow | 17.7 gpm
67.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 5733 lbs
2600 kg |
Front Hitch | II OptOptional |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 (1.375) |
Front PTO | independent OptOptional |
Clutch | dry disc |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 91.5 inches
232 cm |
4WD Wheelbase | 94 inches
238 cm |
Weight | 6922 to 8333 pounds |
Front tire | 7.50-18 |
2WD Rear tire | 16.9R34 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
DX3.10-DX3.30-DX3.50-DX3.70-DX3.90 published in 1985, by Deutz-Fahr |
Recommended Products
Advertisement · Featured Tractor-Related Products
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
John Deere Original Equipment Cool-Gard II PRE-Mix
COOL-GARD II PRE-MIX, 1 GAL;3.78L. DO NOT ADD WATER. Prediluted Engine Coolant. Heavy-duty, low-silicate, high performance antifreeze/coolant. This is a OEM John Deere Part.
Hy-Gard Transmission & Hydraulic Oil
Genuine OEM Part Number: TY22000 An exclusive formulation, specifically designed to protect John Deere transmissions, final drives, and hydraulic systems.
Classic Tractors: Complete Encyclopedia
Comprehensive guide to classic tractor models from all major brands
* This page contains affiliate links, purchases may generate revenue for this site