Eagle Manufacturing F 16-30

The Eagle Manufacturing F 16-30 is a tractor produced by Eagle Manufacturing. It is equipped with a 804 ci 13.2 L engine. Transmission: 2 forward and 1 reverse. Operating weight: 7100 lbs 3220 kg.

Fuel & Capacities

Kerosene

Transmission

2 forward and 1 reverse

Operating Weight

7100 lbs 3220 kg

Overview

	1916 - 1922 Standard-tread tractor

Production
Manufacturer	Eagle Manufacturing
Standard-tread tractor
Built in Appleton, Wisconsin, USA

Eagle Manufacturing F 16-30 Engine
Eagle Manufacturing 13.2L 2-cyl kerosene
Engine details ...

Eagle Manufacturing F 16-30 Transmission
2-speed gear
Transmission details ...

Eagle Manufacturing F 16-30 Power
Drawbar (claimed)	16 hp 11.9 kW
Belt (claimed)	30 hp 22.4 kW
Plows	4 (14-inch)
Drawbar (tested)	19.97 hp 14.9 kW
Belt (tested)	31.80 hp 23.7 kW
Performance test details ...

Mechanical
Two-wheel drive
Final drives	spur gear
Steering	manual
Open operator station.

Dimensions & Tires
Weight	7100 lbs 3220 kg
Rear tire	52x12
Full dimensions and tires ...

Belt Pulley
Diameter	24 inches 60 cm
Width	10 inches 25 cm
RPM	450
Speed	2800 ft/min 853.44 meters/min

Engine

Engine Detail — 804 ci / 13.2 L Kerosene

Manufacturer	Eagle Manufacturing
Fuel Type	Kerosene
Configuration	2-cylinder 4-valve, liquid-cooled
Displacement	804 ci 13.2 L
Bore/Stroke	8.00x8.00 inches 203 x 203 mm
Fuel system	Schebler carburetor
Rated RPM	450
Starter type	hand-crank

Transmission

Transmission — 2 forward and 1 reverse gear

Type	gear
Gears	2 forward and 1 reverse

Dimensions

Eagle Manufacturing F 16-30 Tires
Ag rear	52x12 (steel)

Dimensions
Length	141 inches 358 cm
Width	70 inches 177 cm
Height	78 inches 198 cm
Weight	7100 lbs 3220 kg

Tests

Nebraska Tractor Test 80
Kerosene 2-speed 2WD August 17 - 25, 1921 Link: Nebraska Tractor Test 80 file
Belt power (max)	31.80 hp 23.7 kW
Belt fuel use (max)	4.2 gal/hour 15.9 l/hour
Drawbar performance
Max power	19.97 hp 14.9 kW
Gear 1 used for power test.
Max pull	3615 lbs 1639 kg
Gear 1 used for pull test.

Photos

Eagle Manufacturing F 16-30

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Eagle Manufacturing F 16-30.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours