Erkunt Kudret 100

The Erkunt Kudret 100 is a tractor produced by Erkunt. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 100.4 hp / 74.9 kW. Transmission: 16 forward and reverse. Operating weight: 10913 lbs 4950 kg.

Engine Power

Diesel (listed): 100.4 hp / 74.9 kW

Fuel & Capacities

29.1 gal 110.1 L

Transmission

16 forward and reverse

Operating Weight

10913 lbs 4950 kg

Overview

	2010 - Row-Crop tractor
2010 -
Row-Crop tractor

Production
Manufacturer	Erkunt
Row-Crop tractor
Built in Ankara, Turkey

Variants
CRD	Deutz engine

Erkunt Kudret 100 Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	29.1 gal 110.1 L
Engine details ...

Erkunt Kudret 100 Transmission
16-speed power shuttle
Transmission details ...

Erkunt Kudret 100 Power
Engine	100.4 hp 74.9 kW

Mechanical
Four-wheel drive
Cab standard with air-conditioning.

Hydraulics
Pressure	2756 psi 190.0 bar
Valves	8
Pump flow	15.9 gpm 60.2 lpm

Tractor hitch
Rear lift	11023 lbs 5000 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	430/540/540E/1000

Dimensions & Tires
Wheelbase	94.7 inches 240 cm
Weight	10913 lbs 4950 kg
Front tire	360/70R28
Rear tire	420/85R38
Full dimensions and tires ...

References

Great Luxury Series published by Erkunt

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins 1104D-44TA
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.13x5.00 inches 105 x 127 mm
Emissions	Stage IIIA
Power	100.4 hp 74.9 kW
Rated RPM	2200
Torque	302.4 lb-ft 410.1 Nm
Torque RPM	1400
Starter type	electric

Transmission

Transmission — 16 forward and reverse power shuttle

Type	power shuttle
Gears	16 forward and reverse

Dimensions

Erkunt Kudret 100 Tires
Standard tires (ag)	Front: 360/70R28. Rear: 420/85R38

Dimensions
Wheelbase	94.7 inches 240 cm
Length	175 inches 444 cm
Width	79.1 inches*Minimum width. 200 cm
Height (cab)	111.8 inches 283 cm
Weight	10913 lbs 4950 kg
Front tread	65 to 73.6 inches 165 to 186 cm
Rear tread	63.8 to 73.6 inches 162 to 186 cm

Photos

Erkunt Kudret 100 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Erkunt Kudret 100 based on its 100.4 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Erkunt Kudret 100.

Estimated Continuous Field Runtime: 5.6 hrs

Approximately 5.6 hours of continuous field operation at ~75% rated power on a full tank (29.1 gal / 110.2 L).

Estimated 75% Load Fuel Burn~5.2 gal/hr (19.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours