Farmtrac 60

The Farmtrac 60 is a tractor produced by Farmtrac. It is equipped with a 192 ci 3.1 L engine. The listed engine power is Diesel (listed): 49.7 hp / 37.1 kW. Transmission: 8 forward and 2 reverse. Operating weight: 4,519 lbs 2049 kg.

Engine Power
Diesel (listed): 49.7 hp / 37.1 kW
Fuel & Capacities
13 gal 49.2 L
Transmission
8 forward and 2 reverse
Operating Weight
4,519 lbs 2049 kg

Overview

Farmtrac 60 tractor photo
1998 - 2003 Utility tractor
Production
Manufacturer
Farmtrac
Utility tractor
Farmtrac 60 Engine
Escorts 3.1L 3-cyl diesel
Engine details ...
Farmtrac 60 Transmission
8-speed constant mesh
Transmission details ...
Farmtrac 60 Power
Engine
49.7 hp 37.1 kW
PTO (claimed)
44.7 hp 33.3 kW
Mechanical
Two-wheel drive
Steering
manual
hydrostatic power (optional)
Mechanical dry disc brakes
Two-post ROPS.
Capacity
Fuel
13 gal 49.2 L
Hydraulic system
6.3 gal 23.8 L
Hydraulics
Type
gear pump
Capacity
6.3 gal 23.8 L
Valves
2
Pump flow
4.5 gpm 17.0 lpm
9 gpmOptOptional 34.1 lpm
Tractor hitch
Rear Type
II
Control
position and draft control
Rear lift (at ends)
3,087 lbs 1400 kg
Power Take-off (PTO)
Rear PTO
transmission
live (two-stage clutch)
Clutch
11-inch dry disc
Rear PTO Type
540 (1.375)
Dimensions & Tires
Wheelbase
82.3 inches 209 cm
Weight
4,519 lbs 2049 kg
Front tire
6.00x16
Rear tire
14.9x28
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
55
Battery CCA
800
Battery volts
12

Engine

Engine Detail — 192 ci / 3.1 L Diesel

Manufacturer
Escorts
Fuel Type
Diesel
Configuration
3-cylinder, liquid-cooled
Displacement
192 ci 3.1 L
Bore/Stroke
4.40x4.20 inches 112 x 107 mm
Power
49.7 hp 37.1 kW
Air cleaner
dual dry element
Compression
16.3:1
Rated RPM
2000
Idle RPM
600-2400
Torque
137 lb-ft 185.8 Nm
Torque RPM
1400
Firing order
1-2-3
Starter
electric
Starter volts
12
Coolant capacity
13.75 qts 13.0 L
Intake valve clearance
0.016 inches (cold) 0.406 mm
Exhaust valve clearance
0.019 inches (cold) 0.483 mm
Oil capacity
6.34 qts 6.0 L

Transmission

Transmission — 8 forward and 2 reverse constant mesh

Type
constant mesh
Gears
8 forward and 2 reverse
Four gears, plus reverse, in high and low ranges. Tractor must be stopped, and clutch used, to shift gears or range.
60  constant mesh speeds

Dimensions

Farmtrac 60 Tires
Ag front
6.00x16
Ag rear
14.9x28
Dimensions
Wheelbase
82.3 inches 209 cm
Length
133.9 inches 340 cm
Width
57.8 inches (minimum) 146 cm
Height (exhaust)
85.4 inches 216 cm
Clearance (front axle)
14 inches 35 cm
Flange rear axle
Rear tread
48 to 76 inches 121 to 193 cm
Farmtrac 60 Weight
Operating
4,519 lbs 2049 kg
Max capacity
6,900 lbs 3129 kg
Max front axle
3,000 lbs 1360 kg
Max rear axle
6,000 lbs 2721 kg

Photos

Farmtrac 60 tractor with model 5345 loader.

Farmtrac 60 tractor with model 5345 loader.

Recommended Implements & Sizing Guide

Engineering recommendations for Farmtrac 60 based on its 49.7 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)Medium DutyStandard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
Small Square Baler (14x18")小方捆打捆机 (36x46 cm)Medium DutyClassic 2-string baler for horse and small livestock hay.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Farmtrac 60.

Estimated Continuous Field Runtime: 5 hrs

Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (13 gal / 49.2 L).

Estimated 75% Load Fuel Burn~2.6 gal/hr (9.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Farmtrac 60 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Farmtrac 60.

Converted Equivalents:

Horsepower (HP)49.7 hp
Kilowatts (kW)37.1 kW
Metric Horsepower (PS / CV)50.4 PS

Direct Competitor Comparison

Compare Farmtrac 60 against same-era industry alternatives in the same horsepower class.

Current Model
Farmtrac

Farmtrac 60

Engine Power:Diesel (listed): 49.7 hp / 37.1 kW
★ Baseline Reference
DeereMarket Competitor

Deere 1546F

Engine Power:45
Production Years:1996 - 2003
Massey FergusonMarket Competitor

Massey Ferguson 231S

Engine Power:45
Production Years:1999 - 2003
Allis ChalmersMarket Competitor

Allis Chalmers 6040

Engine Power:44.8
Production Years:1974 - 1975
BobcatMarket Competitor

Bobcat CT4045

Engine Power:44.9
Production Years:2019 - 2026