Fendt 1149 MT
The Fendt 1149 MT is a tractor produced by Fendt. It is equipped with a 1025 ci 16.8 L engine. The listed engine power is Diesel (gross): 450.6 hp / 336.0 kW. Transmission: Caterpillar TA22. Drive type: crawler. Operating weight: 42692 lbs 19365 kg.
Engine Power
Diesel (gross): 450.6 hp / 336.0 kW
Drive & Traction
crawler
Fuel & Capacities
264.2 gal
1000.0 L
Transmission
Caterpillar TA22
Operating Weight
42692 lbs
19365 kg
Overview
 | 2017 -
1100 MT SeriesAgricultural Crawler tractor |
|---|---|
2017 - | |
1100 MT Series | |
Agricultural Crawler tractor | |
Production | |
|---|---|
Manufacturer | Fendt (a part of AGCO) |
Agricultural Crawler tractor | |
Variants | |
|---|---|
MT845E | similar Challenger model |
Fendt 1149 MT Engine | |
|---|---|
AGCO Power 16.8L 12-cyl diesel | |
Fuel tank | 264.2 gal
1000.0 L |
Exhaust fluid (DEF) | 28 gal
106.0 L |
Engine details ...  | |
Fendt 1149 MT Transmission | |
|---|---|
16-speed full power shift | |
Transmission details ...  |
Fendt 1149 MT Power | |
|---|---|
Engine (gross) | 450.6 hp
336.0 kW |
Engine (max) | 485.5 hp
362.0 kW |
Mechanical | |
|---|---|
Drive | crawler |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | closed center pressure flow compensated |
Pressure | 2901 psi
200.0 bar |
Rear valves | 6 OptOptional |
Pump flow | 59.2 gpm
224.1 lpm |
84.8 gpmOptOptional
321.0 lpm | |
SCV flow | 37 gpm
140.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | IV/III |
Rear lift | 30865 lbs
14000 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 1000 |
Engine RPM | 1000@1980 |
Dimensions & Tracks | |
|---|---|
Wheelbase | 118.1 inches
299 cm |
Weight | 42692 lbs
19365 kg |
27.5-inch tracks | |
Full dimensions and tracks ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
Fednt 1100 MT published in 2019, by Fendt |
Engine
Engine Detail — 1025 ci / 16.8 L Diesel
Manufacturer | AGCO Power |
Configuration | turbocharged diesel, 12-cylinder, liquid-cooled V12 |
Displacement | 1025 ci
16.8 L |
Bore/Stroke | 4.370x5.709 inches
111 x 145 mm |
Emissions | Tier IV |
Rated Power (gross) | 450.6 hp
336.0 kW |
Maximum Power (gross) | 485.5 hp
362.0 kW |
Rated RPM | 2100 |
Operating RPM | 1500-2100 |
Torque | 1600.5 lb-ft
2170.3 Nm |
Torque RPM | 1500 |
Starter type | electric |
Transmission
Transmission — Caterpillar TA22
Transmission | Caterpillar TA22 |
Type | full power shift |
Gears | 16 forward and 4 reverse |
Dimensions
Fendt 1149 MT Tracks | |
|---|---|
Width | 27.5 inches
69 cm |
Width | 30 inches
76 cm |
Dimensions | |
|---|---|
Wheelbase | 118.1 inches
299 cm |
Length | 266 inches
675 cm |
Width | 118.1 inches
299 cm |
Height (cab) | 136.2 inches
345 cm |
Weight | 42692 lbs
19365 kg |
Max weight | 59525 lbs
27000 kg |
Ground clearance | 18.1 inches
45 cm |
Gauge | 90 inches
228 cm |
Photos
Fendt 1149 MT tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Fendt 1149 MT based on its 450.6 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁 | Commercial / Field Scale | High horsepower articulated/4WD field plowing. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙 | Commercial / Field Scale | Broad-acre grain tillage for high-drawbar tractors. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt 1149 MT.
Estimated Continuous Field Runtime: 11.3 hrs
Approximately 11.3 hours of continuous field operation at ~75% rated power on a full tank (264.2 gal / 1000.1 L).
Estimated 75% Load Fuel Burn~23.4 gal/hr (88.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Fendt 1149 MT Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Fendt 1149 MT.
Converted Equivalents:
Horsepower (HP)450.6 hp
Kilowatts (kW)336 kW
Metric Horsepower (PS / CV)456.8 PS
Direct Competitor Comparison
Compare Fendt 1149 MT against same-era industry alternatives in the same horsepower class.
Current Model
Fendt
Fendt 1149 MT
Engine Power:Diesel (gross): 450.6 hp / 336.0 kW
★ Baseline Reference
Related models
Fendt 938 Vario MT
- Power:
- 374
- Production years:
- 2020 - 2026
Fendt 939 Vario
- Power:
- 376
- Production years:
- 2010 - 2026
Fendt 1038 Vario
- Power:
- 380
- Production years:
- 2015 - 2025
Fendt 940 Vario MT
- Power:
- 399.6
- Production years:
- 2020 - 2026
Fendt 942 Vario
- Power:
- 415
- Production years:
- 2020 - 2026