Fendt Farmer 304LS

The Fendt Farmer 304LS is a tractor produced by Fendt. It is equipped with a 190.1 ci 3.1 L engine. The listed engine power is Diesel (listed): 58 hp / 43.3 kW. Transmission: 15 forward and 4 reverse. Operating weight: 7154 to 7441 pounds.

Engine Power

Diesel (listed): 58 hp / 43.3 kW

Fuel & Capacities

21.1 gal 79.9 L

Transmission

15 forward and 4 reverse

Operating Weight

7154 to 7441 pounds

Overview

	1982 - 1998 Farmer 300 SeriesUtility tractor Farmer 300 Series Utility tractor

Production
Manufacturer	Fendt
Utility tractor

Fendt Farmer 304LS Engine
MWM 3.1L 3-cyl diesel
Fuel tank	21.1 gal 79.9 L
Engine details ...

Fendt Farmer 304LS Transmission
15-speed synchromesh
Transmission details ...

Fendt Farmer 304LS Power
Engine	58 hp 43.3 kW

Mechanical
Two- or four-wheel drive
Power steering
Hydraulic drum brakes
Cab standard with heat. Air-conditioning optional.

Hydraulics
Type	open center
Pump flow	10.6 gpm 40.1 lpm
Steering flow	9.25 gpm 35.0 lpm

Tractor hitch
Rear lift	4718 lbs 2140 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
	540/750
	540/750/1000

Dimensions & Tires
2WD Wheelbase	90 inches 228 cm
4WD Wheelbase	86.3 inches 219 cm
Weight	7154 to 7441 pounds
Front tire	10.00-16
2WD Rear tire	13.6R36
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	33
Battery volts	12
Battery AH	88

References

Innovations for 1988 published by Fendt

Engine

Engine Detail — 190.1 ci / 3.1 L Diesel

Manufacturer	MWM
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	190.1 ci 3.1 L
Bore/Stroke	4.13x4.72 inches 105 x 120 mm
Power	58 hp 43.3 kW
Rated RPM	2350
Torque	151.2 lb-ft 205.0 Nm
Torque RPM	1500
Starter volts	12

Transmission

Transmission — 15 forward and 4 reverse synchromesh

Type	synchromesh
Gears	15 forward and 4 reverse
Clutch	310mm hydraulic disc
Three gears, plus reverse, in two ranges with two-speed torque converter. Additional three overdrive gears for road speed.

Dimensions

Fendt Farmer 304LS Tires
2WD Standard tires (ag)	Front: 10.00-16. Rear: 13.6R36
4WD Standard tires (ag)	Front: 12.5-20. Rear: 13.6R36
2WD Optional tires (ag)	Front: 7.50-16. Rear: 13.6R36
4WD Optional tires (ag)	Front: 12.5-20. Rear: 16.9-30
4WD Optional tires (ag)	Front: 10.5-20. Rear: 14.9-30
4WD Optional tires (ag)	Front: 9.5-24. Rear: 13.6-36
4WD Optional tires (ag)	Front: 9.5-24. Rear: 12.4-36

Dimensions
2WD Wheelbase	90 inches 228 cm
4WD Wheelbase	86.3 inches 219 cm
Length	149.4 inches 379 cm
Width	77.5 inches 196 cm
Height (cab)	101.2 inches 257 cm
2WD Ground clearance	17.5 inches 44 cm
4WD Ground clearance	13.4 inches 34 cm

Fendt Farmer 304LS Weight
2WD Shipping	7154 lbs 3245 kg
4WD Shipping	7441 lbs 3375 kg
Max capacity	10362 lbs 4700 kg

Photos

Fendt Farmer 304LS

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt Farmer 304LS based on its 58 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt Farmer 304LS.

Estimated Continuous Field Runtime: 7 hrs

Approximately 7 hours of continuous field operation at ~75% rated power on a full tank (21.1 gal / 79.9 L).

Estimated 75% Load Fuel Burn~3 gal/hr (11.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours