Ford 3055
The Ford 3055 is a tractor produced by Ford. It is equipped with a 183 ci 3.0 L engine. The listed engine power is Diesel (listed): 55 hp / 41.0 kW. Transmission: 8 forward and 2 reverse. Operating weight: 4409 lbs 1999 kg.
Engine Power
Diesel (listed): 55 hp / 41.0 kW
Fuel & Capacities
13.2 gal
50.0 L
Transmission
8 forward and 2 reverse
Operating Weight
4409 lbs
1999 kg
Overview
 | 1970 - 1974
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Ford |
Utility tractor | |
Built in Antwerp, Belgium | |
Ford 3055 Engine | |
|---|---|
Ford 3.0L 3-cyl diesel | |
Engine details ...  |
Ford 3055 Transmission | |
|---|---|
8-speed gear | |
Transmission details ...  |
Ford 3055 Power | |
|---|---|
Engine | 55 hp
41.0 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | planetary |
Differential lock | mechanical rear |
Manual steering | |
Wet disc brakes | |
Open operator station. | |
Capacity | |
|---|---|
Fuel | 13.2 gal
50.0 L |
Hydraulic system | 7 gal
26.5 L |
Hydraulics | |
|---|---|
Capacity | 7 gal
26.5 L |
Tractor hitch | |
|---|---|
Rear Type | I |
II | |
Control | position and draft control |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 (1.375) |
Engine RPM | 540@1800 |
Dimensions & Tires | |
|---|---|
Wheelbase | 78 inches
198 cm |
Weight | 4409 lbs
1999 kg |
Front tire | 6.00x19 |
Rear tire | 12.4/11x36 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Battery AH | 128 |
References | |
|---|---|
 | |
3055 published in 1972, by Ford |
Engine
Engine Detail — 183 ci / 3.0 L Diesel
Manufacturer | Ford |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 183 ci
3.0 L |
Bore/Stroke | 4.20x4.40 inches
107 x 112 mm |
Power | 55 hp
41.0 kW |
Fuel system | direct injection |
Rated RPM | 2200 |
Starter volts | 12 |
Oil capacity | 8 qts
7.6 L |
Coolant capacity | 14 qts
13.2 L |
Transmission
Transmission — 8 forward and 2 reverse gear
Type | gear |
Gears | 8 forward and 2 reverse |
Clutch | 279.4mm dry dsic |
 | |
Dimensions
Ford 3055 Tires | |
|---|---|
Ag front | 6.00x19 |
Ag rear | 12.4/11x36 |
Ag rear | 14.9/13x28 |
Dimensions | |
|---|---|
Wheelbase | 78 inches
198 cm |
Length | 128 inches
325 cm |
Width | 67.3 inches
170 cm |
Height (steering wheel) | 61.8 inches
156 cm |
Height (hood) | 57.9 inches
147 cm |
Weight | 4409 lbs
1999 kg |
Front tread | 52 to 80 inches
132 to 203 cm |
Rear tread | 52 to 80 inches
132 to 203 cm |
Photos
Ford 3055, right side.
Ford 3055, left side.
Recommended Implements & Sizing Guide
Engineering recommendations for Ford 3055 based on its 55 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ford 3055.
Estimated Continuous Field Runtime: 4.6 hrs
Approximately 4.6 hours of continuous field operation at ~75% rated power on a full tank (13.2 gal / 50 L).
Estimated 75% Load Fuel Burn~2.9 gal/hr (10.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ford 3055 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford 3055.
Converted Equivalents:
Horsepower (HP)55 hp
Kilowatts (kW)41 kW
Metric Horsepower (PS / CV)55.8 PS
Direct Competitor Comparison
Compare Ford 3055 against same-era industry alternatives in the same horsepower class.
Current Model
Ford
Ford 3055
Engine Power:Diesel (listed): 55 hp / 41.0 kW
★ Baseline Reference