Ford 8240

The Ford 8240 is a tractor produced by Ford. It is equipped with a 456 ci 7.5 L engine. The listed engine power is 100.8 hp 75.2 kW. Transmission: ElectroShift/Pulse Command. Operating weight: 8684 to 10882 pounds.

Engine Power
100.8 hp 75.2 kW
Fuel & Capacities
57.5 gal 217.6 L
Transmission
ElectroShift/Pulse Command
Operating Weight
8684 to 10882 pounds

Overview

Ford 8240 tractor photo
1992 - 1995 PowerStar 40 SeriesRow-Crop tractor PowerStar 40 Series Row-Crop tractor
Production
Manufacturer
Ford
Row-Crop tractor
Built in Basildon, England
Original price was $40,500 in 1997
Variants
8240SL
12-speed
8240SLE
16-speed premium
Ford 8240 Engine
Ford 7.5L 6-cyl diesel
Fuel tank
57.5 gal 217.6 L
Engine details ...
Ford 8240 Power
PTO (claimed)
96 hp 71.6 kW
Drawbar (tested)
84.5 hp 63.0 kW
PTO (tested)
100.8 hp 75.2 kW
Performance test details ...
Mechanical
Two- or four-wheel drive
Final drives
inboard planetary
Differential lock
electro-hydraulic
Power steering
Hydraulic wet disc brakes
Two-post foldable ROPS with flat-deck platform. Comfort Command Cab optional with air-conditioning.
Hydraulics
Type
gear pump (SL)
closed center load sensing (SLE)
Valves
1 to 4
Pump flow
17.4 gpm 65.9 lpm
20 gpm (SLE) 75.7 lpm
Steering press.
2100 psi 144.8 bar
Tractor hitch
Rear Type
II
Control
Position control and top-link draft sensing (8240 SL)
Electronic lower-link sensing (8240 SLE)
Rear lift (at 24"/610mm)
6,210 lbs (SL) 2816 kg
8,240 lbs (SL optional) 3737 kg
6,564 lbs (SLE) 2977 kg
8,710 lbs (SLE optional) 3950 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/1000
Dimensions & Tires
2WD Wheelbase
106 inches 269 cm
4WD Wheelbase
103 inches 261 cm
Weight
8684 to 10882 pounds
Front tire
10.00-16
Rear tire
18.4-34
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
55 (ROPS)
100 (cab)
Batteries
1 (ROPS)
2 (cab)
Battery CCA
800
Battery volts
12
References
8240 references literature
Front-end Loaders published in 1992, by Ford
Front-end Loaders published in 1995, by New Holland
66 to 106 PTO hp PowerStar Tractors published in 1991, by Ford
66 to 106 PTO hp PowerStar Tractors published in 1992, by Ford

Engine

Engine Detail — 456 ci / 7.5 L Diesel

Manufacturer
Ford Genesis
Fuel Type
Diesel
Configuration
6-cylinder 12-valve, liquid-cooled
Displacement
456 ci 7.5 L
Bore/Stroke
4.40x5.00 inches 112 x 127 mm
Compression
17.5:1
Rated RPM
2100
Idle RPM
725-2275
Firing order
1-5-3-6-2-4
Starter volts
12
Coolant capacity
21.1 qts 20.0 L
22.7 qts (cab) 21.5 L
Intake valve clearance
0.016 inches (cold) 0.406 mm
Exhaust valve clearance
0.019 inches (cold) 0.483 mm
Oil capacity
22.1 qts 20.9 L

Transmission

Transmission options
12-speed synchronized
16-speed four-speed power shift

Transmission — SynchroShift

Transmission
SynchroShift
Type
synchronized
Gears
12 forward and reverse
Clutch
dry disc
Four gears (1-4) in three ranges (L/M/H) with right-hand shuttle lever. Gear shifts are synchronized. Shifts between medium and high ranges are synchronized, but the tractor should be stopped to shift to or from low range. Sychronized shuttle shifting. The 12-speed SynchroShift was standard on the 8240 SL.
With 16.9-38 rear tires.
8240 SynchroShift synchronized speeds

Transmission — ElectroShift/Pulse Command

Transmission
ElectroShift/Pulse Command
Type
four-speed power shift
Gears
16 forward and reverse
Clutch
wet disc
Oil capacity
64 qts 60.6 L
Four power shift gears arranged in two synchronized ratio groups (1-4 and 5-8). Two synchronized ranges (low/high) and right-hand shuttle. Clutch must be used to shift range or move between the lower (1-4) and higher (5-8) gear ratio groups. Push-button power shifting between the four gears in a ratio group. Push-button de-clutching on the shuttle lever allow shifting without the foot clutch. The 16 power shift was standard on the 8240 SLE.
With 16.9-38 rear tires.
8240 ElectroShift/Pulse Command four-speed power shift speeds

Dimensions

Ford 8240 Tires
Ag front
10.00-16
Ag rear
18.4-34
Dimensions
2WD Wheelbase
106 inches 269 cm
4WD Wheelbase
103 inches 261 cm
Length
176 inches 447 cm
Width
83 inches 210 cm
2WD Clearance (front axle)
24 inches 60 cm
4WD Clearance (front axle)
22 inches 55 cm
Ford 8240 Weight
2WD ROPS Shipping
8,684 lbs 3939 kg
4WD ROPS Shipping
9,742 lbs 4418 kg
2WD Cab Shipping
9,824 lbs 4456 kg
4WD Cab Shipping
10,882 lbs 4936 kg
Ford 8240 Height
Hood
70 inches 177 cm
Cab
110 inches 279 cm
Exhaust
114 inches 289 cm

Tests

Nebraska Tractor Test 164
Diesel 16-speed 4WD September 1992 - 1992,
PTO performance
Power at rated engine speed
100.8 hp 75.2 kW
Fuel use
5.8 gal/hour 22.0 l/hour
Drawbar performance
Max power
84.5 hp 63.0 kW
Fuel use
6.4 gal/hour 24.2 l/hour

Attachments

Attachment overview
Ford 7411 loader
Ford 7413 loader

Photos

Ford 8240

Ford 8240

Ford 8240

Ford 8240

Recommended Implements & Sizing Guide

Engineering recommendations for Ford 8240 based on its 100.8 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼Heavy DutyWide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机Heavy DutyHigh density baling; requires minimum 85 PTO HP.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Ford 8240.

Estimated Continuous Field Runtime: 11 hrs

Approximately 11 hours of continuous field operation at ~75% rated power on a full tank (57.5 gal / 217.7 L).

Estimated 75% Load Fuel Burn~5.2 gal/hr (19.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Ford 8240 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford 8240.

Converted Equivalents:

Horsepower (HP)100.8 hp
Kilowatts (kW)75.2 kW
Metric Horsepower (PS / CV)102.2 PS

Direct Competitor Comparison

Compare Ford 8240 against same-era industry alternatives in the same horsepower class.

Current Model
Ford

Ford 8240

Engine Power:100.8 hp 75.2 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 2670 HD

Engine Power:91
Production Years:2010 - 2013
DeereMarket Competitor

Deere 3135

Engine Power:91
Production Years:1977 - 1979
Deutz-FahrMarket Competitor

Deutz-Fahr 4.68

Engine Power:91
Production Years:1993 - 1995
International HarvesterMarket Competitor

International Harvester 966

Engine Power:91
Production Years:1971 - 1976
  • Ford 6610S

    Power:
    85
    Production years:
    1994 - 2003
  • Ford 6610

    Power:
    86
    Production years:
    1988 - 1991
  • Ford 7200

    Power:
    89
    Production years:
    1973 - 1975
  • Ford 6630

    Power:
    90
    Production years:
    1992 - 1997
  • Ford 6810

    Power:
    90
    Production years:
    1988 - 1991