Ford 8630

The Ford 8630 is a tractor produced by Ford. It is equipped with a 494.4 ci 8.1 L engine. The rated power output is 160 hp 119.3 kW. Transmission: 24 forward and 8 reverse. Operating weight: 9600 lbs 4354 kg.

Overview

	1992 - 1997 30 Superforça Series
1992 - 1997
30 Superforça Series

Production
Manufacturer	Ford (a part of New Holland)
Built in Curitiba, Brazil
The Brazillian-built Ford 8630 is similar to the Fiat 160-90.

Ford 8630 Engine
Fiat 8.1L 6-cyl diesel
Engine details ...

Ford 8630 Power
Engine	160 hp 119.3 kW
PTO (claimed)	140 hp 104.4 kW

Mechanical
Four-wheel drive
Differential lock	hydraulic
Power steering
Hydraulic wet disc brakes
Two-post ROPS. Cab optional with air-conditioning.

Capacity
Fuel	74 gal 280.1 L
Hydraulic system	15.7 gal 59.4 L
Front axle	13.6 qts 12.9 L

Hydraulics
Capacity	15.7 gal 59.4 L
Pressure	2503 psi 172.6 bar
Pump flow	14.5 gpm 54.9 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift (at 24"/610mm)	14650 lbs 6645 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	hydraulic
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@1000

Dimensions & Tires
Wheelbase	113.6 inches 288 cm
Weight	9600 lbs 4354 kg
Front tire	14.9x28
Rear tire	18.4x38
Full dimensions and tires ...

Electrical
Charging system	alternator
Charging amps	65
Battery volts	12
Battery AH	165

Engine

Engine Detail — 494.4 ci / 8.1 L Diesel

Manufacturer	Fiat 8365.25
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled inline
Displacement	494.4 ci 8.1 L
Bore/Stroke	4.53x5.12 inches 115 x 130 mm
Power	160 hp 119.3 kW
Fuel system	direct injection
Air cleaner	dual stage dry
Compression	15.5:1
Rated RPM	2200
Torque	435.2 lb-ft 590.1 Nm
Torque RPM	1400
Starter	electric
Starter volts	12
Oil capacity	19.4 qts 18.4 L
Coolant capacity	28.5 qts 27.0 L

Transmission

Transmission options
12-speed partially synchronized
24-speed creeper

Transmission — 12 forward and 4 reverse partially synchronized

Type	partially synchronized
Gears	12 forward and 4 reverse
Clutch	305mm cerametallic disc
Oil capacity	22.3 qts 21.1 L
Four gears (1-4) in three ranges (I, II, III) plus reverse (R) range.
With 18.4x38 rear tires.

Transmission — 24 forward and 8 reverse creeper

Type	creeper
Gears	24 forward and 8 reverse
Clutch	305mm cerametallic disc
Four gears (1-4) in three ranges (I, II, III) plus reverse (R) range with additional dual range shift (creeper/normal).
With 18.4x38 rear tires.

Dimensions

Ford 8630 Tires
Standard tires (ag)	Front: 14.9x28. Rear: 18.4x38

Dimensions
Wheelbase	113.6 inches 288 cm
Length	174 inches 441 cm
Width	112.7 inches 286 cm
Shipping weight	9600 lbs 4354 kg
Ballasted weight	16810 lbs 7625 kg
Front tread	70.9 to 86.6 inches 180 to 219 cm
Rear tread	63.8 to 86.6 inches 162 to 219 cm