International Harvester 330

The International Harvester 330 is a tractor produced by International Harvester. It is equipped with a 134.8 ci 2.2 L engine. Transmission: Torque Amplifier. Operating weight: 4,100 lbs 1859 kg.

Fuel & Capacities

11.25 gal 42.6 L

Transmission

Torque Amplifier

Operating Weight

4,100 lbs 1859 kg

Overview

	1957 - 1958 Utility tractor

Production
Manufacturer	International Harvester
Utility tractor
Built in Rock Island, Illinois, USA
Total built	4,262
Original price was $2,900 in 1958
The short-lived International model 330 utility tractor matched the chassis of the 350 with the smaller C-135 that would later be used in the model 340.

International Harvester 330 Engine
International Harvester 2.2L 4-cyl gasoline
Engine details ...

International Harvester 330 Power
Drawbar (claimed)	32.4 hp 24.2 kW
Belt (claimed)	35.2 hp 26.2 kW
Drawbar (tested)	31.77 hp 23.7 kW
Belt (tested)	34.24 hp 25.5 kW
Performance test details ...

Mechanical
Two-wheel drive
Steering	manual
Steering	power OptOptional
Disc brakes
Open operator station.

Capacity
Fuel	11.25 gal 42.6 L
Hydraulic system	3.4 gal 12.9 L

Hydraulics
Type	open center OptOptional
Capacity	3.4 gal 12.9 L
Valves	1 to 3

Tractor hitch
Type	IH Fast Hitch

Power Take-off (PTO)
Rear PTO	transmission
	independent OptOptional
Rear PTO Type	540

Dimensions & Tires
Wheelbase	73.5 inches 186 cm
Weight	4,100 lbs 1859 kg
Front tire	5.50x16
Rear tire	11x28
Full dimensions and tires ...

References

330 and 350 Utility Tractors published in 1958, by International Harvester

Engine

Engine Detail — 134.8 ci / 2.2 L Gasoline

Manufacturer	International Harvester C135
Fuel Type	Gasoline
Configuration	4-cylinder, liquid-cooled
Displacement	134.8 ci 2.2 L
Bore/Stroke	3.25x4.0625 inches 83 x 103 mm
Air cleaner	oil bath
Compression	7.38:1
Rated RPM	2000
Starter volts	6
Coolant capacity	14 qts 13.2 L

Transmission

Transmission options
5-speed sliding gear
10-speed two-speed power shift

Transmission — 5 forward and 1 reverse sliding gear

Type	sliding gear
Gears	5 forward and 1 reverse
Clutch	dry disc

Transmission — Torque Amplifier

Transmission	Torque Amplifier
Type	two-speed power shift
Gears	10 forward and 2 reverse
Clutch	dry disc

Dimensions

International Harvester 330 Tires
Ag front	5.50x16
Ag rear	11x28
Ag front	6.00x16
	7.50x16
Ag rear	10x28
	12x28
	14x24

Dimensions
Wheelbase	73.5 inches 186 cm
Length	117 inches 297 cm
Width	64 inches 162 cm
Height (steering wheel)	60 inches 152 cm
Operating weight	4,100 lbs 1859 kg
Ballasted weight	6,115 lbs 2773 kg
Front tread	48 to 76 inches 121 to 193 cm
Rear tread	48 to 76 inches 121 to 193 cm

Tests

Nebraska Tractor Test 634
Gasoline Torque Amplifier 2WD November 5 - 14, 1957 Link: Nebraska Tractor Test 634 file
Belt power (max)	34.24 hp 25.5 kW
Belt fuel use (max)	3.0 gal/hour 11.4 l/hour
Drawbar performance
Max power	31.77 hp 23.7 kW
Gear 3 used for power test.
Max pull	4,710 lbs 2136 kg
Gear 1-TA used for pull test.

Attachments

Attachment overview
Front-end loader
Backhoe

International 60 Backhoe
Backhoe type	International 60 Backhoe
Digging depth	120 inches 304 cm
Reach from pivot	150 inches 381 cm
Swing Arc	180°

International 90 Backhoe
Backhoe type	International 90 Backhoe
Digging depth	144 inches 365 cm
Reach from pivot	192 inches 487 cm
Swing Arc	160°

Photos

International Harvester 330

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester 330.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours