International Harvester 4166
The International Harvester 4166 is a tractor produced by International Harvester. It is equipped with a 436 ci 7.1 L engine. The listed engine power is Diesel (listed): 175 hp / 130.5 kW. Transmission: 8 forward and 4 reverse. Drive type: 4x4 4WD. Operating weight: 15900 lbs 7212 kg.
Overview
![]() | 1972 - 1976
66 SeriesFour-wheel Drive (4WD) tractor
66 Series
Four-wheel Drive (4WD) tractor |
|---|
Production | |
|---|---|
Manufacturer | International Harvester |
Four-wheel Drive (4WD) tractor | |
Original price was $29,900 in 1976 | |
International Harvester 4166 Engine | |
|---|---|
International Harvester 7.1L 6-cyl diesel | |
Fuel tank | 100 gal
378.5 L |
Engine details ... | |
International Harvester 4166 Transmission | |
|---|---|
8-speed sliding gear | |
Transmission details ... |
International Harvester 4166 Power | |
|---|---|
Engine | 175 hp
130.5 kW |
Drawbar (tested) | 127.55 hp
95.1 kW |
PTO (tested) | 150.63 hp
112.3 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Drive | 4x4 4WD |
Final drives | planetary |
Steering | hydraulic power |
Hydraulic expanding shoe brakes | |
Cab optional with available heat and air-conditioning. | |
Hydraulics | |
|---|---|
Type | open center |
Valves | 3 OptOptional |
Pump flow | 16.5 gpm
62.5 lpm |
Tractor hitch | |
|---|---|
Rear Type | III |
Rear lift (at ends) | 6000 lbs
2721 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 102 inches
259 cm |
Weight | 15300 to 15900 pounds |
Front tire | 23.1-26 |
Rear tire | 23.1-26 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 72 |
Batteries | 2 |
Battery volts | 6 |
References | |
|---|---|
![]() | |
Farm Equipment Reference Catalog published in 1971, by International Harvester |
Engine
Engine Detail — 436 ci / 7.1 L Diesel
Manufacturer | International Harvester DT-436 |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 436 ci
7.1 L |
Bore/Stroke | 4.30x5.00 inches
109 x 127 mm |
Power | 175 hp
130.5 kW |
Fuel system | direct injection |
Compression | 16:1 |
Rated RPM | 2400 |
Starter volts | 12 |
Oil capacity | 18 qts
17.0 L |
Coolant capacity | 32 qts
30.3 L |
Transmission
Transmission — 8 forward and 4 reverse sliding gear
Type | sliding gear |
Gears | 8 forward and 4 reverse |
Clutch | dry disc |
![]() | |
Dimensions
International Harvester 4166 Tires | |
|---|---|
Ag front | 23.1-26 |
Ag rear | 23.1-26 |
Dimensions | |
|---|---|
Wheelbase | 102 inches
259 cm |
Length | 194 inches
492 cm |
Width | 103 inches
261 cm |
Height (steering wheel) | 93 inches
236 cm |
Height (exhaust) | 138 inches
350 cm |
Weight | 15900 lbs
7212 kg |
Shipping weight | 15300 lbs
6940 kg |
Ground clearance | 17 inches
43 cm |
Front tread | 80 inches
203 cm |
Rear tread | 80 inches
203 cm |
Tests
Nebraska Tractor Test 1116 | |
|---|---|
Diesel 8-speed 4WD
November 1 - December 6, 1972
Link: Nebraska Tractor Test 1116 file | |
PTO performance | |
Power at rated engine speed | 150.63 hp
112.3 kW |
Fuel use | 9.9 gal/hour
37.5 l/hour |
Power at rated PTO speed | 152.72 hp
113.9 kW |
Fuel use | 9.1 gal/hour
34.4 l/hour |
Drawbar performance | |
Max power | 127.55 hp
95.1 kW |
Gear 4-Low used for power test. | |
Max pull | 19,434 lbs
8815 kg |
Gear 1-Low used for pull test. | |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for International Harvester 4166 based on its 175 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester 4166.
Estimated Continuous Field Runtime: 11 hrs
Approximately 11 hours of continuous field operation at ~75% rated power on a full tank (100 gal / 378.5 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
International Harvester 4166 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for International Harvester 4166.
Converted Equivalents:
Direct Competitor Comparison
Compare International Harvester 4166 against same-era industry alternatives in the same horsepower class.
International Harvester 4166
Related models
International Harvester 1066
- Power:
- 140
- Production years:
- 1971 - 1976
International Harvester 1086
- Power:
- 144.4
- Production years:
- 1976 - 1981
International Harvester 1456
- Power:
- 144.4
- Production years:
- 1969 - 1971
International Harvester 4100
- Power:
- 144.4
- Production years:
- 1965 - 1968
International Harvester 1455
- Power:
- 145
- Production years:
- 1979 - 1981




