International Harvester 644

The International Harvester 644 is a tractor produced by International Harvester. It is equipped with a 206.4 ci 3.4 L engine. The listed engine power is Diesel (listed): 60 hp / 44.7 kW. Transmission: 8 forward and 4 reverse. Operating weight: 6350 to 7078 pounds.

Engine Power
Diesel (listed): 60 hp / 44.7 kW
Fuel & Capacities
19.6 gal 74.2 L
Transmission
8 forward and 4 reverse
Operating Weight
6350 to 7078 pounds

Overview

International Harvester 644 tractor photo
1974 - 1980 Row-Crop tractor
Production
Manufacturer
International Harvester
Row-Crop tractor
Built in Neuss, Germany
International Harvester 644 Engine
International Harvester 3.4L 4-cyl diesel
Fuel tank
19.6 gal 74.2 L
Engine details ...
International Harvester 644 Transmission
8-speed
Transmission details ...
International Harvester 644 Power
Engine
60 hp 44.7 kW
Mechanical
Two- or four-wheel drive
Manual steering
Open operator station.
Hydraulics
Pump flow
7.9 gpm 29.9 lpm
Tractor hitch
Rear Type
II
Rear lift
6394 lbs 2900 kg
Power Take-off (PTO)
Rear PTO Type
540/1000
Engine RPM
540@1982
1000@2000
Dimensions & Tires
Wheelbase
87.8 inches 223 cm
Weight
6350 to 7078 pounds
Front tire
7.50-16
Rear tire
16.9-30
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12

Engine

Engine Detail — 206.4 ci / 3.4 L Diesel

Manufacturer
International Harvester D-206
Fuel Type
Diesel
Configuration
4-cylinder, liquid-cooled
Displacement
206.4 ci 3.4 L
Bore/Stroke
3.875x4.38 inches 98 x 111 mm
Power
60 hp 44.7 kW
Rated RPM
2150
Starter volts
12

Transmission

Transmission — 8 forward and 4 reverse

Gears
8 forward and 4 reverse
644   speeds

Dimensions

International Harvester 644 Tires
Ag front
7.50-16
9.5-24 (MFWD)
Ag rear
16.9-30
Dimensions
Wheelbase
87.8 inches 223 cm
Length
148.8 inches 377 cm
Height
98 inches 248 cm
2WD Weight
6350 lbs 2880 kg
4WD Weight
7078 lbs 3210 kg

Photos

International Harvester 644 utility tractor.

International Harvester 644 utility tractor.

International 644 with hay tedder.

International 644 with hay tedder.

Recommended Implements & Sizing Guide

Engineering recommendations for International Harvester 644 based on its 60 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester 644.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (19.6 gal / 74.2 L).

Estimated 75% Load Fuel Burn~3.1 gal/hr (11.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

International Harvester 644 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for International Harvester 644.

Converted Equivalents:

Horsepower (HP)60 hp
Kilowatts (kW)44.7 kW
Metric Horsepower (PS / CV)60.8 PS

Direct Competitor Comparison

Compare International Harvester 644 against same-era industry alternatives in the same horsepower class.

Current Model
International Harvester

International Harvester 644

Engine Power:Diesel (listed): 60 hp / 44.7 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 155

Engine Power:54
Production Years:1970 - 1976
FordMarket Competitor

Ford 4110

Engine Power:54
Production Years:1982 - 1983
New HollandMarket Competitor

New Holland Boomer 54D

Engine Power:54
Production Years:2015 - 2025
Deutz-FahrMarket Competitor

Deutz-Fahr DX 3.30

Engine Power:54
Production Years:1984 - 1995