International Harvester 833

The International Harvester 833 is a tractor produced by International Harvester. It is equipped with a 238.65 ci 3.9 L engine. The listed engine power is Diesel (listed): 67 hp / 50.0 kW. Transmission: Synchron. Operating weight: 6426 lbs 2914 kg.

Engine Power

Diesel (listed): 67 hp / 50.0 kW

Fuel & Capacities

17.2 gal 65.1 L

Transmission

Synchron

Operating Weight

6426 lbs 2914 kg

Overview

	1981 - 1990 33 SeriesUtility tractor 33 Series Utility tractor

Production
Manufacturer	International Harvester
Utility tractor
Built in Neuss, Germany

Variants
833	utility
833E	narrow

International Harvester 833 Engine
International Harvester 3.9L 4-cyl diesel
Engine details ...

International Harvester 833 Power
Engine	67 hp 50.0 kW

Mechanical
Four-wheel drive

Capacity
Fuel	17.2 gal 65.1 L
Hydraulic system	3.2 gal 12.1 L

Hydraulics
Capacity	3.2 gal 12.1 L
Pressure	2538 psi 175.0 bar
Pump flow	15.85 gpm 60.0 lpm

Tractor hitch
Rear Type	II
Control	position control and upper-link draft sensing
Rear lift	4851 lbs 2200 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540
	540/1000

Dimensions & Tires
Wheelbase	84.65 inches 215 cm
Weight	6426 lbs 2914 kg
Front tire	10.5-18
Rear tire	14.9R30
Full dimensions and tires ...

Electrical
Charging system	alternator
Charging amps	33
Battery volts	12

Engine

Engine Detail — 238.65 ci / 3.9 L Diesel

Manufacturer	International Harvester D-239
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	238.65 ci 3.9 L
Bore/Stroke	3.875x5.06 inches 98 x 129 mm
Power	67 hp 50.0 kW
Fuel system	direct injection
Rated RPM	2300
Torque	173.3 lb-ft 235.0 Nm
Torque RPM	1500
Starter volts	12
Oil capacity	9.5 qts 9.0 L

Transmission

Transmission options
8-speed
16-speed
16-speed creeper

Transmission — 8 forward and 4 reverse

Gears	8 forward and 4 reverse
Oil capacity	36.5 qts 34.5 L
Four gears (1-4) in two ranges, plus reverse range.
With 16.9R30 rear tires.

Transmission — Synchron

Transmission	Synchron
Gears	16 forward and 8 reverse
Type	creeper
Gears	16 forward and 8 reverse
With 16.9R30 rear tires.

Dimensions

International Harvester 833 Tires
Standard tires (ag)	Front: 10.5-18. Rear: 14.9R30

Dimensions
Wheelbase	84.65 inches 215 cm
Length	140.6 inches 357 cm
Width	77.6 inches 197 cm
Height (cab)	97.6 inches 247 cm
Weight	6426 lbs 2914 kg
Ground clearance	11.9 inches 30 cm
Front tread	54.1 to 63.9 inches 137 to 162 cm
Rear tread	50.2 to 76 inches 127 to 193 cm

Photos

International Harvester 833 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for International Harvester 833 based on its 67 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester 833.

Estimated Continuous Field Runtime: 4.9 hrs

Approximately 4.9 hours of continuous field operation at ~75% rated power on a full tank (17.2 gal / 65.1 L).

Estimated 75% Load Fuel Burn~3.5 gal/hr (13.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours