International Harvester B-614

The International Harvester B-614 is a tractor produced by International Harvester. It is equipped with a 281 ci 4.6 L engine. The listed engine power is Diesel (listed): 62.5 hp / 46.6 kW. Transmission: 8 forward and 2 reverse. Operating weight: 6188 lbs 2806 kg.

Engine Power
Diesel (listed): 62.5 hp / 46.6 kW
Fuel & Capacities
20.4 gal 77.2 L
Transmission
8 forward and 2 reverse
Operating Weight
6188 lbs 2806 kg

Overview

International Harvester B-614 tractor photo
1963 - 1968 Standard-tread tractor
Production
Manufacturer
International Harvester
Standard-tread tractor
Built in Doncaster, England
Total built
3,947
International Harvester B-614 Engine
International Harvester 4.6L 4-cyl diesel
Engine details ...
International Harvester B-614 Transmission
8-speed gear
Transmission details ...
International Harvester B-614 Power
Engine
62.5 hp 46.6 kW
Drawbar (claimed)
52 hp 38.8 kW
PTO (claimed)
55 hp 41.0 kW
Mechanical
Two- or four-wheel drive
Manual steering
Disc brakes
Open operator station.
Capacity
Fuel
20.4 gal 77.2 L
Hydraulic system
4.2 gal 15.9 L
Hydraulics
Type
open center
Capacity
4.2 gal 15.9 L
Pressure
2000 psi 137.9 bar
Pump flow
7.2 gpm 27.3 lpm
Tractor hitch
Rear Type
II
Rear lift (at ends)
3700 lbs 1678 kg
Power Take-off (PTO)
Rear PTO
transmission
independent OptOptional
Rear PTO Type
540 (1.375)
Engine RPM
540@1150
Dimensions & Tires
Weight
6188 lbs 2806 kg
Front tire
7.50-16
Rear tire
12-38
Full dimensions and tires ...
Electrical
Charging system
generator
Batteries
2
Battery volts
6
References
B-614 references literature
International 1917-1961 Vintage Tractor Special by Allen Condie*
The Roar of Dust and Diesel - A Story of International Harvester Doncaster by Mike Teanby
World Wide Farm Equipment Buyer's Guide published in 1968, by International Harvester*
McCormick B-614 Tractor published in 1965, by International Harvester
*Publication contains known errors.

Engine

Engine Detail — 281 ci / 4.6 L Diesel

Manufacturer
International Harvester BD-281
Fuel Type
Diesel
Configuration
4-cylinder, liquid-cooled
Displacement
281 ci 4.6 L
Bore/Stroke
4.135x5.25 inches 105 x 133 mm
Power
62.5 hp 46.6 kW
Rated RPM
1600
Torque
225 lb-ft 305.1 Nm
Torque RPM
1200
Starter
electric
Starter volts
12
International Harvester B-614 Engine
International Harvester B-614 engine image

Transmission

Transmission — 8 forward and 2 reverse gear

Type
gear
Gears
8 forward and 2 reverse
Clutch
dry disc
With 12.00-38 rear tires.
B-614  gear speeds

Dimensions

International Harvester B-614 Tires
Ag front
7.50-16
Ag rear
12-38
Ag front
6-16
6-19
Ag rear
11-38
14-30
15-30
Dimensions
Length
139 inches 353 cm
Height (steering wheel)
68 inches 172 cm
Operating weight
6188 lbs 2806 kg
Ground clearance
16.75 inches 42 cm
Front tread
51.75 to 61 inches 131 to 154 cm
Front tread
52 to 76 inches 132 to 193 cm
Rear tread
52 to 72 inches 132 to 182 cm
Rear tread
52 to 88 inches 132 to 223 cm

Photos

International Harvester B-614

International Harvester B-614

Recommended Implements & Sizing Guide

Engineering recommendations for International Harvester B-614 based on its 62.5 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester B-614.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (20.4 gal / 77.2 L).

Estimated 75% Load Fuel Burn~3.3 gal/hr (12.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

International Harvester B-614 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for International Harvester B-614.

Converted Equivalents:

Horsepower (HP)62.5 hp
Kilowatts (kW)46.6 kW
Metric Horsepower (PS / CV)63.4 PS

Direct Competitor Comparison

Compare International Harvester B-614 against same-era industry alternatives in the same horsepower class.

Current Model
International Harvester

International Harvester B-614

Engine Power:Diesel (listed): 62.5 hp / 46.6 kW
★ Baseline Reference
FordMarket Competitor

Ford 4030

Engine Power:56.7
Production Years:1992 - 1997
DeereMarket Competitor

Deere 2100

Engine Power:57
Production Years:1993 - 1998
Massey FergusonMarket Competitor

Massey Ferguson 253

Engine Power:57
Production Years:1988 - 1998
CockshuttMarket Competitor

Cockshutt 1355

Engine Power:56.7
Production Years:1969 - 1971