International Harvester Cub Lo-Boy
The International Harvester Cub Lo-Boy is a tractor produced by International Harvester. It is equipped with a 59.5 ci 1.0 L engine. The rated power output is 13.4 hp 10.0 kW. Transmission: 3 forward and 1 reverse. Operating weight: 1620 lbs 734 kg.
Engine Power
13.4 hp
10.0 kW
Fuel & Capacities
7.5 gal
28.4 L
Transmission
3 forward and 1 reverse
Operating Weight
1620 lbs
734 kg
International Harvester Cub Lo-Boy Serial Number & Year Decoder
Find the exact manufacture year of your tractor by checking your chassis serial number below.
Where to Find the Serial NumberThe serial number plate is commonly located on the front frame, tractor transmission housing (right side), or instrument panel badge.
Overview
![]() | 1955 - 1968
Utility tractor |
|---|---|
1955 - 1968 | |
Utility tractor | |
Production | |
|---|---|
Manufacturer | International Harvester |
Utility tractor | |
Built in Louisville, Kentucky, USA | |
The Cub Lo-Boy is very similar to the standard Cub. The Lo-Boy using shorter front end spindles and rotating the final drive made the Lo-Boy about 8 inches shorter than the standard Cub. Both the standard Cub and the Lo-Boy had the IH "Cultivision" offset engine and steering. | |
International Harvester Cub Lo-Boy Engine | |
|---|---|
International Harvester 1.0L 4-cyl gasoline | |
Fuel tank | 7.5 gal
28.4 L |
Engine details ... | |
International Harvester Cub Lo-Boy Transmission | |
|---|---|
3-speed sliding gear | |
Transmission details ... |
International Harvester Cub Lo-Boy Power | |
|---|---|
Engine | 13.4 hp
10.0 kW |
Drawbar (claimed) | 10 hp
7.5 kW |
PTO (claimed) | 11 hp
8.2 kW |
Belt (claimed) | 9.76 hp
7.3 kW |
Plows | 1 (12 inch) |
Mechanical | |
|---|---|
Two-wheel drive | |
Final drives | bull gear |
Manual steering | |
Open operator station. | |
Hydraulics | |
|---|---|
Type | open center |
Pressure | 1200 psi
82.7 bar |
Pump flow | 2.8 gpm
10.6 lpm |
Tractor hitch | |
|---|---|
Type | IH Fast Hitch OptOptional |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | Cub-10 (0.9375) |
Engine RPM | -1800@1800 |
Dimensions & Tires | |
|---|---|
Wheelbase | 62 inches
157 cm |
Weight | 1620 lbs
734 kg |
Front tire | 4.00-12 |
Rear tire | 8.3-24 |
Full dimensions and tires ... | |
Links | |
|---|---|
FarmallCub.com: Information, photos, and a message board |
Electrical | |
|---|---|
Ground | positive (early) |
negative (late) | |
Battery volts | 6 (early) |
12 (late) | |
References | |
|---|---|
![]() | |
Buyers Guide International Industrial Tractors & Equipment published in 1960, by International Harvester | |
Industrial Tractors and matched equipment published in 1960, by International Harvester | |
Industrial Tractors & Equipment Buyers Guide published in 1962, by International Harvester | |
Farm Loaders published in 1962, by International Harvester | |
Farm Loaders published in 1970, by International Harvester | |
Spring 1968 Buyer's Guide published by International Harvester | |
Summer-Fall 1968 Buyer's Guide published by International Harvester | |
Cub Lo-Boy and Cub Tractors published in 1966, by International Harvester | |
Cub Lo-Boy Tractor published by International Harvester | |
![]() | |
International Cub and Cub Lo-Boy Tractors (1 014 031 R3) published in 1959 | |
International Cub and Cub Lo-Boy Tractors (1 014 488 R4) published in 1965 | |
International Cub and Cub Lo-Boy Tractors (1 014 488 R8) published in 1975 |
Engine
Engine Detail — 59.5 ci / 1.0 L Gasoline
Manufacturer | International Harvester C60 |
Fuel Type | Gasoline |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 59.5 ci
1.0 L |
Bore/Stroke | 2.625x2.75 inches
67 x 70 mm |
Power | 13.4 hp
10.0 kW |
Rated RPM | 1800 |
Firing order | 1-3-4-2 |
Starter volts | 6 (early) |
12 (late) | |
Oil capacity | 3 qts
2.8 L |
Coolant capacity | 9.75 qts
9.2 L |
Sparkplug gap | 0.023 inches
0.584 mm |
Intake valve clearance | 0.013 inches (cold)
0.330 mm |
Exhaust valve clearance | 0.013 inches (cold)
0.330 mm |
Transmission
Transmission — 3 forward and 1 reverse sliding gear
Type | sliding gear |
Gears | 3 forward and 1 reverse |
Clutch | dry disc |
![]() | |
Dimensions
International Harvester Cub Lo-Boy Tires | |
|---|---|
Ag front | 4.00-12 |
Ag rear | 8.3-24 |
Dimensions | |
|---|---|
Wheelbase | 62 inches
157 cm |
Length | 92 inches
233 cm |
Width | 48.25 inches*Width at minimum tread.
122 cm |
Height (steering wheel) | 56.25 inches
142 cm |
Weight | 1620 lbs
734 kg |
Clearance (front axle) | 14 inches
35 cm |
Clearance (rear axle) | 14 inches
35 cm |
Rear axle | 1.56 inch diameter
39 mm |
Front tread | 43 to 55 inches
109 to 139 cm |
Rear tread | 40 to 56 inches
101 to 142 cm |
Photos
Related models
International Harvester Type A 12HP
- Power:
- 13.3
- Production years:
- 1908 - 1911
International Harvester Cub
- Power:
- 13
- Production years:
- 1964 - 1979
International Harvester D-214
- Power:
- 14
- Production years:
- 1958 - 1962
International Harvester DLD-2
- Power:
- 14
- Production years:
- 1953 - 1956
International Harvester D-212
- Power:
- 12
- Production years:
- 1956 - 1959








