International Harvester D-432

The International Harvester D-432 is a tractor produced by International Harvester. It is equipped with a 132.7 ci 2.2 L engine. The listed engine power is Diesel (listed): 32 hp / 23.9 kW. Transmission: Agriomatic. Operating weight: 3287 lbs 1490 kg.

Engine Power

Diesel (listed): 32 hp / 23.9 kW

Fuel & Capacities

14.5 gal 54.9 L

Transmission

Agriomatic

Operating Weight

3287 lbs 1490 kg

Overview

	1962 - 1965 D SeriesUtility tractor D Series Utility tractor

Production
Manufacturer	International Harvester
Utility tractor
Built in Neuss, Germany
Total built	10,712

International Harvester D-432 Engine
International Harvester 2.2L 4-cyl diesel
Fuel tank	14.5 gal 54.9 L
Engine details ...

International Harvester D-432 Power
Engine	32 hp 23.9 kW

Mechanical
Two-wheel drive
Open operator station.

Tractor hitch
Rear Type	II/I

Power Take-off (PTO)
Rear PTO Type	540 (1.375)

Dimensions & Tires
Wheelbase	74 inches 187 cm
Weight	3287 lbs 1490 kg
Front tire	5.00-16
Rear tire	10-28
Full dimensions and tires ...

References

D-432 Diesel published by International Harvester

Engine

Engine Detail — 132.7 ci / 2.2 L Diesel

Manufacturer	International Harvester DD-132
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	132.7 ci 2.2 L
Bore/Stroke	3.252x4.00 inches 83 x 102 mm
Power	32 hp 23.9 kW
Compression	19:1
Rated RPM	1900
Starter volts	12
Coolant capacity	14.5 qts 13.7 L

Transmission

Transmission options
6-speed gear
8-speed

Transmission — 6 forward and 1 reverse gear

Type	gear
Gears	6 forward and 1 reverse

Transmission — Agriomatic

Transmission	Agriomatic
Gears	8 forward and 2 reverse

Dimensions

International Harvester D-432 Tires
Ag front	5.00-16
Ag rear	10-28
Ag front	4.00-15
	5.50-16
	7.50-16
Ag rear	10-24
	13-30
	11-28
	9-32
	11-32
	9-36
	11-36

Dimensions
Wheelbase	74 inches 187 cm
Length	115.25 inches 292 cm
Width	64.5 inches 163 cm
Height	61 inches 154 cm
Weight	3287 lbs 1490 kg

Photos

International Harvester D-432 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for International Harvester D-432 based on its 32 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester D-432.

Estimated Continuous Field Runtime: 8.7 hrs

Approximately 8.7 hours of continuous field operation at ~75% rated power on a full tank (14.5 gal / 54.9 L).

Estimated 75% Load Fuel Burn~1.7 gal/hr (6.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours