International Harvester Farmall

The International Harvester Farmall is a tractor produced by International Harvester. It is equipped with a 220.9 ci 3.6 L engine. Transmission: 3 forward and 1 reverse. Operating weight: 4,000 lbs 1814 kg.

Fuel & Capacities

13 gal 49.2 L

Transmission

3 forward and 1 reverse

Operating Weight

4,000 lbs 1814 kg

Overview

	1924 - 1932 Row-Crop tractor

Production
Manufacturer	International Harvester
Row-Crop tractor
Factories	Chicago, Illinois, USA
	Rock Island, Illinois, USA
Total built	134,650
Originally named simply the "Farmall", this original model later became unofficially known as the "Regular" after the improved Farmall F-20 was introduced. The Farmall was the first successful row-crop tractor design and its design dominated North American tractors for the following fifty years.

Variants
Fairway	wide steel wheels for turf

International Harvester Farmall Engine
International Harvester 3.6L 4-cyl gasoline
Fuel tank	13 gal 49.2 L
Aux. fuel	0.86 gal 3.3 L
Engine details ...

International Harvester Farmall Transmission
3-speed
Transmission details ...

International Harvester Farmall Power
Plows	2
Drawbar (tested)	13.27 hp 9.9 kW
Belt (tested)	20.05 hp 15.0 kW
Performance test details ...

Mechanical
Two-wheel drive
Steering	manual with automatic engagement of turning brakes
Open operator's seat

Power Take-off (PTO)
Rear PTO	transmission
Rear PTO Type	535

Dimensions & Tires
Weight	4,000 lbs 1814 kg
Front tire	25x4
Rear tire	40x6
Full dimensions and tires ...

Belt Pulley
Diameter	14 inches 35 cm
Width	6.5 inches 16 cm
RPM	693

References

Will A Tractor Pay On Your Farm? published in 1930, by International Harvester

Engine

Engine Detail — 220.9 ci / 3.6 L Gasoline

Manufacturer	International Harvester
Fuel Type	Gasoline
Configuration	4-cylinder, liquid-cooled vertical
Displacement	220.9 ci 3.6 L
Bore/Stroke	3.75x5.00 inches 95 x 127 mm
Air cleaner	oil bath and fiber
Rated RPM	1200
Starter type	hand crank
Coolant capacity	36 qts 34.1 L

Transmission

Transmission — 3 forward and 1 reverse

Gears	3 forward and 1 reverse

Dimensions

International Harvester Farmall Tires
Ag front	25x4 steel
Ag rear	40x6 steel
Lawn/turf front	25x8 steel (Fairway)
Lawn/turf rear	40x16 steel (Fairway)

Dimensions
Length	136 inches 345 cm
Width	86 inches 218 cm
Height	67 inches 170 cm
Weight	4,000 lbs 1814 kg

Tests

Nebraska Tractor Test 117
Gasoline 3-speed 2WD September 14 - 19, 1925 Link: Nebraska Tractor Test 117 file
Belt power (max)	20.05 hp 15.0 kW
Belt fuel use (max)	2.1 gal/hour 7.9 l/hour
Drawbar performance
Max power	13.27 hp 9.9 kW
Gear 2 used for power test.
Max pull	2,727 lbs 1236 kg
Gear 1 used for pull test.

Photos

International Harvester Farmall

Clayton and the Farmall.

Farmall with oil filter and duckbill steering gear.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester Farmall.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours