Iseki TA410
The Iseki TA410 is a tractor produced by Iseki. It is equipped with a 136.5 ci 2.2 L engine. The listed engine power is Diesel (listed): 40.4 hp / 30.1 kW. Transmission: 16 forward and reverse. Operating weight: 3847 to 4244 pounds.
Engine Power
Diesel (listed): 40.4 hp / 30.1 kW
Fuel & Capacities
13.5 gal
51.1 L
Transmission
16 forward and reverse
Operating Weight
3847 to 4244 pounds
Overview
![]() | 1985 - 1987
Landleader TA0 SeriesCompact Utility tractor
Landleader TA0 Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Iseki TA410 Engine | |
|---|---|
Isuzu 2.2L 4-cyl diesel | |
Fuel tank | 13.5 gal
51.1 L |
Engine details ... | |
Iseki TA410 Transmission | |
|---|---|
16-speed | |
Transmission details ... |
Iseki TA410 Power | |
|---|---|
Engine | 40.4 hp
30.1 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Four-post ROPS. Cab optional. |
Tractor hitch | |
|---|---|
Rear Type | JIS1 |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 565@2500 |
677@2500 | |
821@2500 | |
1270@2500 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 77.6 inches
197 cm |
Weight | 3847 to 4244 pounds |
Front tire | 6.00-16 |
2WD Rear tire | 13.6-28 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Landleader 340 - 370 - 410 - 450 published in 1986, by Iseki |
Engine
Engine Detail — 136.5 ci / 2.2 L Diesel
Manufacturer | Isuzu 4JC1 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 136.5 ci
2.2 L |
Bore/Stroke | 3.465x3.622 inches
88 x 92 mm |
Power | 40.4 hp
30.1 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 16 forward and reverse
Gears | 16 forward and reverse |
![]() | |
Dimensions
Iseki TA410 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 6.00-16. Rear: 13.6-28 |
4WD Standard tires (ag) | Front: 8-18. Rear: 13.6-28 |
Dimensions | |
|---|---|
Wheelbase | 77.6 inches
197 cm |
Length | 134.3 inches
341 cm |
Width | 61.4 inches
155 cm |
Height | 86.4 inches
219 cm |
2WD Weight | 3847 lbs
1744 kg |
4WD Weight | 4244 lbs
1925 kg |
Ground clearance | 14.4 inches
36 cm |
2WD Front tread | 45.5 to 61 inches
115 to 154 cm |
4WD Front tread | 48 inches
121 cm |
Rear tread | 48 to 63.8 inches
121 to 162 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TA410 based on its 40.4 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TA410.
Estimated Continuous Field Runtime: 6.4 hrs
Approximately 6.4 hours of continuous field operation at ~75% rated power on a full tank (13.5 gal / 51.1 L).
Estimated 75% Load Fuel Burn~2.1 gal/hr (8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TA410 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TA410.
Converted Equivalents:
Horsepower (HP)40.4 hp
Kilowatts (kW)30.1 kW
Metric Horsepower (PS / CV)41 PS
Direct Competitor Comparison
Compare Iseki TA410 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TA410
Engine Power:Diesel (listed): 40.4 hp / 30.1 kW
★ Baseline Reference
Related models
Iseki AT5330
- Power:
- 32.5
- Production years:
- 2013 - 2023
Iseki AT33
- Power:
- 32.6
- Production years:
- 2004 - 2009
Iseki TA337
- Power:
- 32.6
- Production years:
- 1989 - 1992
Iseki TH4330
- Power:
- 32.6
- Production years:
- 2004 - 2008
Iseki TK33
- Power:
- 32.6
- Production years:
- 1996 - 2001



