Iseki TX1510

The Iseki TX1510 is a tractor produced by Iseki. It is equipped with a 51.8 ci 0.8 L engine. The listed engine power is Diesel (listed): 14.6 hp / 10.9 kW. Transmission: 6 forward and 2 reverse. Operating weight: 1168 to 1213 pounds.

Engine Power
Diesel (listed): 14.6 hp / 10.9 kW
Fuel & Capacities
3.1 gal 11.7 L
Transmission
6 forward and 2 reverse
Operating Weight
1168 to 1213 pounds

Overview

Iseki TX1510 tractor photo
1978 - 1981 Compact Utility tractor
Production
Manufacturer
Iseki
Compact Utility tractor
Variants
TX1510F
4WD
Iseki TX1510 Engine
Mitsubishi 0.8L 3-cyl diesel
Fuel tank
3.1 gal 11.7 L
Engine details ...
Iseki TX1510 Transmission
6-speed gear
Transmission details ...
Iseki TX1510 Power
Engine
14.6 hp 10.9 kW
Mechanical
Two- or four-wheel drive
Open operator station.
Tractor hitch
Rear Type
JIS0
Power Take-off (PTO)
Rear PTO Type
540 (1.375)
Engine RPM
454@2600
724@2600
1185@2600
Dimensions & Tires
Wheelbase
50.4 inches 128 cm
Weight
1168 to 1213 pounds
Front tire
4.00-12
2WD Rear tire
8-18
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12
References
TX1510 references literature
Operator's Manual TX1410 - TX1510
TX 1510 published in 1980, by Iseki

Engine

Engine Detail — 51.8 ci / 0.8 L Diesel

Manufacturer
Mitsubishi K3B
Fuel Type
Diesel
Configuration
3-cylinder, liquid-cooled
Displacement
51.8 ci 0.8 L
Bore/Stroke
2.677x3.071 inches 68 x 78 mm
Power
14.6 hp 10.9 kW
Rated RPM
2600
Starter
electric
Starter volts
12

Transmission

Transmission — 6 forward and 2 reverse gear

Type
gear
Gears
6 forward and 2 reverse
TX1510  gear speeds

Dimensions

Iseki TX1510 Tires
2WD Standard tires (ag)
Front: 4.00-12. Rear: 8-18
4WD Standard tires (ag)
Front: 5.00-12. Rear: 8-18
Dimensions
Wheelbase
50.4 inches 128 cm
2WD Length
78 inches 198 cm
4WD Length
78.7 inches 199 cm
Width
44.1 inches 112 cm
Height
66.9 inches 169 cm
2WD Weight
1168 lbs 529 kg
4WD Weight
1213 lbs 550 kg
2WD Ground clearance
13.8 inches 35 cm
4WD Ground clearance
9.8 inches 24 cm
2WD Front tread
27.6 inches 70 cm
4WD Front tread
30.1 inches 76 cm
Rear tread
30.7 to 35 inches 77 to 88 cm

Photos

Iseki TX 1510 tractor.

Iseki TX 1510 tractor.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TX1510.

Estimated Continuous Field Runtime: 4.1 hrs

Approximately 4.1 hours of continuous field operation at ~75% rated power on a full tank (3.1 gal / 11.7 L).

Estimated 75% Load Fuel Burn~0.8 gal/hr (2.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Iseki TX1510 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TX1510.

Converted Equivalents:

Horsepower (HP)14.6 hp
Kilowatts (kW)10.9 kW
Metric Horsepower (PS / CV)14.8 PS