John Deere 3210
The John Deere 3210 is a tractor produced by John Deere. It is equipped with a 239 ci 3.9 L engine. The listed engine power is Engine Detail — 239 ci / 3.9 L (net): 65 hp / 48.5 kW. Transmission: Twinshift. Operating weight: 7340 lbs 3329 kg.
Engine Power
Engine Detail — 239 ci / 3.9 L (net): 65 hp / 48.5 kW
Fuel & Capacities
30.4 gal
115.1 L
Transmission
Twinshift
Operating Weight
7340 lbs
3329 kg
Overview
 | 1998 - 2002
Utility tractorRenault built
Utility tractor
Renault built |
|---|
Production | |
|---|---|
Distributor | John Deere |
Manufacturer | Renault |
Utility tractor | |
Built in Le Mans, France | |
John Deere 3210 Engine | |
|---|---|
John Deere 3.9L 4-cyl | |
Fuel tank | 30.4 gal
115.1 L |
Engine details ...  | |
John Deere 3210 Power | |
|---|---|
Engine (net) | 65 hp
48.5 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Wet disc brakes | |
Cab standard with heat. | |
Hydraulics | |
|---|---|
Pump flow | 13.7 gpm
51.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 6195 lbs
2810 kg |
8267 lbsOptOptional
3749 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 94.5 inches
240 cm |
Weight | 7340 lbs
3329 kg |
Front tire | 11.2R28 |
Rear tire | 13.6R36 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 239 ci / 3.9 L
Manufacturer | John Deere |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 239 ci
3.9 L |
Bore/Stroke | 4.19x4.33 inches
106 x 110 mm |
Rated Power (net) | 65 hp
48.5 kW |
Rated RPM | 2150 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
20-speed synchronized | |
20-speed power shift |
Transmission — 20 forward and reverse synchronized
Type | synchronized |
Gears | 20 forward and reverse |
Transmission — Twinshift
Transmission | Twinshift |
Type | power shift |
Gears | 20 forward and reverse |
Dimensions
John Deere 3210 Tires | |
|---|---|
Standard tires (ag) | Front: 11.2R28. Rear: 13.6R36 |
Dimensions | |
|---|---|
Wheelbase | 94.5 inches
240 cm |
Length | 153 inches
388 cm |
Height (cab) | 96.5 inches
245 cm |
Weight | 7340 lbs
3329 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 3210 based on its 65 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 3210.
Estimated Continuous Field Runtime: 9 hrs
Approximately 9 hours of continuous field operation at ~75% rated power on a full tank (30.4 gal / 115.1 L).
Estimated 75% Load Fuel Burn~3.4 gal/hr (12.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
John Deere 3210 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 3210.
Converted Equivalents:
Horsepower (HP)65 hp
Kilowatts (kW)48.5 kW
Metric Horsepower (PS / CV)65.9 PS
Direct Competitor Comparison
Compare John Deere 3210 against same-era industry alternatives in the same horsepower class.
Current Model
John Deere
John Deere 3210
Engine Power:Engine Detail — 239 ci / 3.9 L (net): 65 hp / 48.5 kW
★ Baseline Reference
Related models
John Deere 2330
- Power:
- 52.5
- Production years:
- 1975 - 1980
John Deere 2010C
- Power:
- 52.7
- Production years:
- 1960 - 1965
John Deere 1120
- Power:
- 53
- Production years:
- 1967 - 1975
John Deere 5210
- Power:
- 53
- Production years:
- 1998 - 2001
John Deere 5220
- Power:
- 53
- Production years:
- 2001 - 2004