John Deere 4510

The John Deere 4510 is a tractor produced by John Deere. It is equipped with a 122 ci 2.0 L engine. The rated power output is 38.4 hp 28.6 kW. Transmission: PowrReverser. Operating weight: 1557 lbs 706 kg.

Overview

	2002 - 2004 4000 Ten Compact SeriesCompact Utility tractor
2002 - 2004
4000 Ten Compact Series
Compact Utility tractor

Production
Manufacturer	John Deere
Compact Utility tractor
Built in Augusta, Georgia, USA

John Deere 4510 Engine
Yanmar 2.0L 4-cyl diesel
Engine details ...

John Deere 4510 Power
Engine (gross)	38.4 hp 28.6 kW
PTO (claimed)	33 hp 24.6 kW

Mechanical
Two- or four-wheel drive
Final drives	planetary
Differential lock	mechanical rear
Power steering
Wet disc brakes
Platform with ROPS.

Capacity
Fuel	12.5 gal 47.3 L
Hydraulic system	9.7 gal 36.7 L
Front axle	5.2 qts 4.9 L

Hydraulics
Type	open center
Capacity	9.7 gal 36.7 L
Pressure	2500 psi 172.4 bar
Pump flow	10.6 gpm 40.1 lpm
Total flow	15.9 gpm 60.2 lpm
Steering flow	5.3 gpm 20.1 lpm

Tractor hitch
Rear Type	I
Rear lift	2500 lbs 1134 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	wet disc
Rear PTO Type	540 (1.375)
Engine RPM	540@2600
Mid PTO	independent OptOptional
Mid PTO Type	2100

Dimensions & Tires
Wheelbase	71.5 inches 181 cm
Weight	3450 lbs 1564 kg
Front tire	6.00-16
Rear tire	13.6-24
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	40
Battery CCA	690
Battery volts	12

References
4000 TEN Series 18 To 48 HP published in 2001, by John Deere
The New John Deere 4000 TEN Series Tractors published in 2002
4000 TEN Series - The tractor redefined published in 2001, by John Deere
4000 TEN Series - Take Command published in 2001, by John Deere
4000 TEN Series Product Information Handbook published in 2003, by John Deere

Engine

Engine Detail — 122 ci / 2.0 L Diesel

Manufacturer	Yanmar 4TNE84
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	122 ci 2.0 L
Bore/Stroke	3.307x3.543 inches 84 x 90 mm
Power (gross)	38.4 hp 28.6 kW
Air cleaner	dry with safety element
Compression	18:1
Rated RPM	2600
Torque	92 lb-ft 124.8 Nm
Torque RPM	1700
Starter volts	12
Starter power	2.7 hp 2.0 kW
Coolant capacity	6.4 qts 6.1 L
Oil capacity	5.1 qts 4.8 L

Transmission

Transmission options
9-speed partially synchronized
12-speed power shuttle

Transmission — SyncShift

Transmission	SyncShift
Type	partially synchronized
Gears	9 forward and 3 reverse
Oil capacity	38.8 qts 36.7 L
The SyncShift transmission is operated via a gear shift lever and range shift lever. The tractor must be stopped, and clutch used, to change ranges. Gear shifts, within a range, may be made on the move using the clutch.
With 13.6-24 rear tires.

Transmission — PowrReverser

Transmission	PowrReverser
Type	power shuttle
Gears	12 forward and reverse
Oil capacity	38.8 qts 36.7 L
With 13.6-24 rear tires.

Dimensions

John Deere 4510 Tires
Ag front	6.00-16 (2WD)
	7.00-16 (4WD)
	8.00-16 (4WD)
Ag rear	13.6-24
	14.9-24
Lawn/turf front	27x10.5-15
	27x12LL-15 (4WD)
Lawn/turf rear	44x18.00-20
	22.5LL-16.1
Industrial front	10.00-16.5 (4WD)
Industrial rear	17.5L-24

Dimensions
Wheelbase	71.5 inches 181 cm
Length	135 inches 342 cm
Width	62 inches*Minimum 157 cm
Shipping weight	3450 lbs 1564 kg

John Deere 4510 Height
Hood	51 inches 129 cm
ROPS	91.6 inches 232 cm
	97.6 inches (folding) 247 cm

Attachments

Attachment overview
72" mid-mount mower deck
Blade
Front-end loader
Backhoe

72" Mower deck
Type	mid-mount John Deere 72 7-Iron
	3-blade with hydraulic lift
Cutting width	72 inches 182 cm
Weight	331 lbs 150 kg
Overall width	85 inches 215 cm
Cut height	1 to 6 inch 2 to 15 cm

John Deere 448 Backhoe
Backhoe type	John Deere 448 Backhoe
Weight	1557 lbs 706 kg
Transport height	90 inches 228 cm
2-Foot flat digging depth	105 inches 266 cm
Reach from pivot	142 inches 360 cm
Loading height	88 inches 223 cm
Bucket Rotation	180°
Swing Arc	180°
Bucket force	3730 lbs 1691 kg
Dipperstick force	2435 lbs 1104 kg