John Deere 9400
The John Deere 9400 is a tractor produced by John Deere. It is equipped with a 765 ci 12.5 L engine. The listed engine power is Diesel (listed): 425 hp / 316.9 kW. Transmission: John Deere PowerShift. Operating weight: 33770 to 37410 pounds.
Overview
![]() | 1997 - 2001
9000 SeriesFour-wheel Drive (4WD) tractor
9000 Series
Four-wheel Drive (4WD) tractor |
|---|
Production | |
|---|---|
Manufacturer | John Deere |
Four-wheel Drive (4WD) tractor | |
Built in Waterloo, Iowa, USA | |
Original price was $121,000 in 2001 | |
Variants | |
|---|---|
9400 | wheeled tractor |
9400T | crawler |
John Deere 9400 Engine | |
|---|---|
John Deere 12.5L 6-cyl diesel | |
Engine details ... |
John Deere 9400 Power | |
|---|---|
Engine | 425 hp
316.9 kW |
PTO (claimed) | 302 hp
225.2 kW |
Drawbar (tested) | 345.00 hp
257.3 kW |
PTO (tested) | 312.25 hp
232.8 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Hydraulic wet disc brakes | |
Cab standard. | |
Capacity | |
|---|---|
Fuel | 256 gal
969.0 L |
Hydraulic system | 26 gal
98.4 L |
Hydraulics | |
|---|---|
Type | closed center PFC |
Capacity | 26 gal
98.4 L |
Pressure | 2900 psi
200.0 bar |
Valves | 2 to 5 |
Pump flow | 35 gpm
132.5 lpm |
Total flow | 44 gpm
166.5 lpm |
Tractor hitch | |
|---|---|
Rear Type | III |
IV/IVN OptOptional | |
Rear lift | 13,871 lbs
6291 kg |
14,445 lbs*Cat. IV
6552 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 1000 OptOptional |
Dimensions & Tires | |
|---|---|
Wheelbase | 137.8 inches
350 cm |
Weight | 33770 to 37410 pounds |
Front tire | 710/70R38 |
Rear tire | 710/70R38 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 140 |
Batteries | 3 |
Battery CCA | 925 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
New 9000 Series Tractors published in 1996, by John Deere | |
Typical Questions & Answers - 9000 Series 4WD Tractor Engines published in 1996, by John Deere | |
The New World Power - 9000 Series Tractors published in 1996, by John Deere | |
9000 Series Tractors Product Information Handbook published in 1998, by John Deere | |
9000/9000T Series Tractors Product Information Handbook published in 1999, by John Deere |
Engine
Engine Detail — 765 ci / 12.5 L Diesel
Manufacturer | John Deere |
Configuration | turbocharged aftercooled diesel, 6-cylinder, liquid-cooled inline |
Displacement | 765 ci
12.5 L |
Bore/Stroke | 5.00x6.50 inches
127 x 165 mm |
Power | 425 hp
316.9 kW |
Compression | 16:1 |
Rated RPM | 2100 |
Coolant capacity | 64 qts
60.6 L |
Oil capacity | 44 qts
41.6 L |
Transmission
Transmission options | |
|---|---|
12-speed partially synchronized | |
24-speed partial power shift | |
12-speed full power shift |
Transmission — John Deere Syncro
Transmission | John Deere Syncro |
Type | partially synchronized |
Gears | 12 forward and 3 reverse |
Oil capacity | 147.2 qts (100mm axle)
139.3 L |
151.6 qts (110mm axle)
143.5 L | |
151.2 qts (PTO 100mm axle)
143.1 L | |
155.6 qts (PTO 110mm axle)
147.3 L | |
140 qts (SN030001+)
132.5 L | |
Three speeds (1-3 and reverse) in four ranges (A-D). Synchronized shifting between speeds using the clutch. Tractor must be stopped, and clutch used, to shift ranges. Reverse is not available in the highest (D) range. | |
With 710/70R38 tires. | |
![]() | |
Transmission — John Deere PowrSync
Transmission | John Deere PowrSync |
Type | partial power shift |
Gears | 24 forward and 6 reverse |
Oil capacity | 147.2 qts (100mm axle)
139.3 L |
151.6 qts (110mm axle)
143.5 L | |
151.2 qts (PTO 100mm axle)
143.1 L | |
155.6 qts (PTO 110mm axle)
147.3 L | |
140 qts (SN030001+)
132.5 L | |
Three speeds (1, 2, 3 and reverse) in four ranges (A-D) plus high-low power shift. Speeds and ranges may be shifted on the move, using the clutch. High-low power shift for each speed using lever. | |
With 710/70R38 tires. | |
![]() | |
Transmission — John Deere PowerShift
Transmission | John Deere PowerShift |
Type | full power shift |
Gears | 12 forward and 2 reverse |
Oil capacity | 64 qts (early)
60.6 L |
56 qts (SN030001+)
53.0 L | |
60 qts (no PTO early)
56.8 L | |
54 qts (no PTO late)
51.1 L | |
120 qts (axles early)
113.6 L | |
108 qts (axles SN030001+)
102.2 L | |
With 710/70R38 tires. | |
![]() | |
Dimensions
John Deere 9400 Tires | |
|---|---|
Ag front | 710/70R38 |
Ag rear | 710/70R38 |
Dimensions | |
|---|---|
Wheelbase | 137.8 inches
350 cm |
Length | 274 inches
695 cm |
Width | 172 inches (duals)
436 cm |
Height (cab) | 137.5 inches
349 cm |
Ground clearance | 28.8 inches (axles)
73 cm |
Front axle | 4.31 by 120 inches
109 by 3048 mm |
Rear axle | 4.31 by 120 inches
109 by 3048 mm |
John Deere 9400 Weight | |
|---|---|
Shipping | 33,770 lbs
15318 kg |
Operating | 37,410 lbs
16969 kg |
Ballasted | 41,456 lbs
18804 kg |
Tests
OCED Tractor Test 1733 | |
|---|---|
Diesel 24-speed 4WD
May 2 - June 18, 1997
Link: OCED Tractor Test 1733 file | |
PTO performance | |
Power at rated engine speed | 312.25 hp
232.8 kW |
Fuel use | 17.2 gal/hour
65.1 l/hour |
Power at rated PTO speed | 343.44 hp
256.1 kW |
Fuel use | 18.0 gal/hour
68.1 l/hour |
Drawbar performance | |
Max power | 345.00 hp
257.3 kW |
Fuel use | 20.3 gal/hour
76.8 l/hour |
Max pull | 38,409 lbs
17422 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 9400 based on its 425 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁 | Commercial / Field Scale | High horsepower articulated/4WD field plowing. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙 | Commercial / Field Scale | Broad-acre grain tillage for high-drawbar tractors. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 9400.
Estimated Continuous Field Runtime: 11.6 hrs
Approximately 11.6 hours of continuous field operation at ~75% rated power on a full tank (256 gal / 969.1 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
John Deere 9400 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 9400.
Converted Equivalents:
Direct Competitor Comparison
Compare John Deere 9400 against same-era industry alternatives in the same horsepower class.
John Deere 9400
Related models
John Deere 8R 340
- Power:
- 340
- Production years:
- 2019 - 2026
John Deere 8345R
- Power:
- 345
- Production years:
- 2014 - 2019
John Deere 8345RT
- Power:
- 345
- Production years:
- 2014 - 2019
John Deere 7R 350
- Power:
- 350
- Production years:
- 2021 - 2026
John Deere 8870
- Power:
- 350
- Production years:
- 1993 - 1996




