Landini Atlantis 70

The Landini Atlantis 70 is a tractor produced by Landini. It is equipped with a 243.5 ci 4.0 L engine. The listed engine power is Diesel (listed): 67 hp / 50.0 kW. Transmission: 24 forward and 12 reverse. Operating weight: 7055 lbs 3200 kg.

Engine Power

Diesel (listed): 67 hp / 50.0 kW

Fuel & Capacities

25.1 gal 95.0 L

Transmission

24 forward and 12 reverse

Operating Weight

7055 lbs 3200 kg

Overview

	2001 - 2003 Atlantis SeriesUtility tractor Atlantis Series Utility tractor

Production
Manufacturer	Landini (a part of Argo)
Utility tractor

Landini Atlantis 70 Engine
Perkins 4.0L 4-cyl diesel
Fuel tank	25.1 gal 95.0 L
Engine details ...

Landini Atlantis 70 Power
Engine	67 hp 50.0 kW
PTO (claimed)	61 hp 45.5 kW

Mechanical
Two- or four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Wet disc brakes
Two-post ROPS.

Hydraulics
Pressure	2610 psi 180.0 bar
Valves	2
Pump flow	14.2 gpm 53.7 lpm
Total flow	20.6 gpm 78.0 lpm
Steering flow	6.3 gpm 23.8 lpm

Tractor hitch
Rear Type	II
Rear lift	5732 lbs 2600 kg
	8157 lbsOptOptional 3700 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	mechanical dry disc
Rear PTO Type	540/750 (1.375)
	540/1000 (1.375)

Dimensions & Tires
Wheelbase	93.7 inches 237 cm
Weight	7055 lbs 3200 kg
Front tire	9.00-16
2WD Rear tire	16.9R30
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

Engine

Engine Detail — 243.5 ci / 4.0 L Diesel

Manufacturer	Perkins 1004-40
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	243.5 ci 4.0 L
Bore/Stroke	3.937x5.00 inches 100 x 127 mm
Emissions	Stage I
Power	67 hp 50.0 kW
Rated RPM	2200
Torque	194 lb-ft 263.1 Nm
Torque RPM	1300
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed shuttle
24-speed shuttle with creeper
24-speed shuttle with overdrive

Transmission — 12 forward and reverse shuttle

Type	shuttle
Gears	12 forward and reverse
Clutch	279.4mm dry disc
Transmission
Type	shuttle with creeper
Gears	24 forward and 12 reverse

Transmission — 24 forward and 12 reverse shuttle with overdrive

Type	shuttle with overdrive
Gears	24 forward and 12 reverse

Dimensions

Landini Atlantis 70 Tires
2WD Standard tires (ag)	Front: 9.00-16. Rear: 16.9R30
4WD Standard tires (ag)	Front: 12.4R24. Rear: 16.9R30

Dimensions
Wheelbase	93.7 inches 237 cm
Length	164.2 inches 417 cm
Width	72 inches*Minimum 182 cm
Height (steering wheel)	65.8 inches 167 cm
Height (ROPS)	100.4 inches 255 cm
Weight	7055 lbs 3200 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Landini Atlantis 70 based on its 67 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini Atlantis 70.

Estimated Continuous Field Runtime: 7.2 hrs

Approximately 7.2 hours of continuous field operation at ~75% rated power on a full tank (25.1 gal / 95 L).

Estimated 75% Load Fuel Burn~3.5 gal/hr (13.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours