Landini Trekker 75

The Landini Trekker 75 is a tractor produced by Landini. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 67 hp / 50.0 kW. Transmission: Mech shuttle/creeper. Drive type: crawler. Operating weight: 8,360 lbs 3792 kg.

Engine Power

Diesel (listed): 67 hp / 50.0 kW

Drive & Traction

crawler

Fuel & Capacities

21.3 gal 80.6 L

Transmission

Mech shuttle/creeper

Operating Weight

8,360 lbs 3792 kg

Overview

	Trekker SeriesAgricultural Crawler tractor
Trekker Series
Agricultural Crawler tractor

Production
Manufacturer	Landini
Agricultural Crawler tractor
Available in the narrow F (fruit) model and the low M (mountain) model with wide tracks.

Landini Trekker 75 Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	21.3 gal 80.6 L
Engine details ...

Landini Trekker 75 Transmission
16-speed
Transmission details ...

Landini Trekker 75 Power
Engine	67 hp 50.0 kW
PTO (claimed)	62 hp 46.2 kW

Mechanical
Drive	crawler
Steering	hydrostatic power
Wet disc brakes

Hydraulics
Valves	3 standard
	5 optional
Pump flow	10.1 gpm 38.2 lpm
Total flow	17 gpm 64.3 lpm

Tractor hitch
Rear Type	II
Rear lift	5,380 lbs 2440 kg

Power Take-off (PTO)
Rear PTO Type	540

Dimensions & Tracks
Wheelbase	65 inches 165 cm
Weight	8,360 lbs 3792 kg
Tracks
Full dimensions and tracks ...

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins 1104C-44
Fuel Type	Diesel
Configuration	4-cylinder
Displacement	268.5 ci 4.4 L
Power	67 hp 50.0 kW

Transmission

Transmission — Mechanical shuttle

Transmission	Mechanical shuttle
Gears	16 forward and 8 reverse
Transmission	Mech shuttle/creeper
Gears	16 forward and 8 reverse

Dimensions

Landini Trekker 75 Tracks

Dimensions
Wheelbase	65 inches 165 cm
Length	138 inches 350 cm
Width	65.5 inches 166 cm
	57.5 inches 146 cm
Height	91 inches 231 cm
Weight	8,360 lbs 3792 kg
Ground clearance	12.5 inches 31 cm

Photos

Landini Trekker 75 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Landini Trekker 75 based on its 67 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini Trekker 75.

Estimated Continuous Field Runtime: 6.1 hrs

Approximately 6.1 hours of continuous field operation at ~75% rated power on a full tank (21.3 gal / 80.6 L).

Estimated 75% Load Fuel Burn~3.5 gal/hr (13.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours