Long 260
The Long 260 is a tractor produced by Long. It is equipped with a 95 ci 1.6 L engine. Transmission: 6 forward and 2 reverse. Operating weight: 3270 lbs 1483 kg.
Fuel & Capacities
14.3 gal
54.1 L
Transmission
6 forward and 2 reverse
Operating Weight
3270 lbs
1483 kg
Overview
 | 1980 - 1990
Utility tractorUTB/Universal built
Utility tractor
UTB/Universal built |
|---|
Production | |
|---|---|
Distributor | Long |
Manufacturer | UTB/Universal |
Utility tractor | |
Variants | |
|---|---|
Universal 260 | similar model |
Long 260 Engine | |
|---|---|
UTB/Universal 1.6L 2-cyl diesel | |
Engine details ...  |
Long 260 Transmission | |
|---|---|
6-speed sliding gear/constant mesh | |
Transmission details ...  |
Long 260 Power | |
|---|---|
PTO (claimed) | 24 hp
17.9 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Steering | manual |
hydrostatic power OptOptional | |
Mechanical band brakes | |
Open operator station. Two-post ROPS optional. FOPS canopy optional. | |
Capacity | |
|---|---|
Fuel | 14.3 gal
54.1 L |
Hydraulic system | 4.25 gal
16.1 L |
10 galOptOptional
37.9 L | |
Rear diff. | 1.5 qts
1.4 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 4.25 gal
16.1 L |
10 galOptOptional
37.9 L | |
Valves | 0 to 2 |
Total flow | 5.75 gpm
21.8 lpm |
Tractor hitch | |
|---|---|
Rear lift | II/I lbs
0 kg |
Rear lift (at ends) | 2645 lbs
1199 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/ground |
Engine RPM | 540@1970 |
Dimensions & Tires | |
|---|---|
Wheelbase | 70.8 inches
179 cm |
Weight | 3270 lbs
1483 kg |
Front tire | 5.00-1511.2-28 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 30 |
Batteries | 1 |
2 | |
Battery volts | 12 |
6 | |
Battery Group | BCI 30H (12v) |
BCI 3EH (6v) | |
References | |
|---|---|
 | |
Loaders published in 1993, by Long |
Engine
Engine Detail — 95 ci / 1.6 L Diesel
Manufacturer | UTB/Universal |
Fuel Type | Diesel |
Configuration | 2-cylinder, liquid-cooled inline |
Displacement | 95 ci
1.6 L |
Bore/Stroke | 3.74x4.33 inches
95 x 110 mm |
Air cleaner | oil bath |
Pre-heating | coolant heater (optional) |
Compression | 17:1 |
Rated RPM | 2400 |
Idle RPM | 600-2550 |
Firing order | 1-2 |
Starter volts | 12 |
Coolant capacity | 8.5 qts
8.0 L |
Oil capacity | 4.5 qts
4.3 L |
Transmission
Transmission — 6 forward and 2 reverse sliding gear/constant mesh
Type | sliding gear/constant mesh |
Gears | 6 forward and 2 reverse |
Oil capacity | 17 qts
16.1 L |
Oil type | LONG Multi-Purpose Tractor Fluid |
Gears 2-3 and 5-6 are synchronized. | |
With 11.2-28 rear tires. | |
 | |
Dimensions
Long 260 Tires | |
|---|---|
Ag front | 5.00-1511.2-28 |
Dimensions | |
|---|---|
Wheelbase | 70.8 inches
179 cm |
Length | 108.8 inches
276 cm |
Width | 65.9 inches
167 cm |
Shipping weight | 3270 lbs
1483 kg |
Clearance (front axle) | 17 inches
43 cm |
Clearance (rear axle) | 19 inches
48 cm |
Front tread | 50.3 to 77.5 inches
127 to 196 cm |
Rear tread | 46.6 to 74.1 inches
118 to 188 cm |
Long 260 Height | |
|---|---|
Steering wheel | 58.3 inches
148 cm |
Hood | 52.6 inches
133 cm |
Exhaust | 75.3 inches
191 cm |
Photos
Long 260
Long 260
Long 260
Long 260
Long 260
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Long 260.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Long 260 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Long 260.
Converted Equivalents:
Horsepower (HP)0 hp
Kilowatts (kW)0 kW
Metric Horsepower (PS / CV)0 PS