Mahindra 2810
The Mahindra 2810 is a tractor produced by Mahindra. It is equipped with a 85 ci 1.4 L engine. The listed engine power is Diesel (listed): 28 hp / 20.9 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 3064 lbs 1389 kg.
Engine Power
Diesel (listed): 28 hp / 20.9 kW
Fuel & Capacities
Diesel
Transmission
infinite forward and reverse (3-range)
Operating Weight
3064 lbs
1389 kg
Overview
 | 2002 - 2006
10 SeriesCompact Utility tractorTYM built
10 Series
Compact Utility tractor
TYM built |
|---|
Production | |
|---|---|
Distributor | Mahindra |
Manufacturer | TYM |
Compact Utility tractor | |
Built in South Korea | |
Mahindra 2810 Engine | |
|---|---|
Daedong 1.4L 3-cyl diesel | |
Engine details ...  |
Mahindra 2810 Power | |
|---|---|
Engine | 28 hp
20.9 kW |
PTO (claimed) | 23 hp
17.2 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Wet disc brakes | |
Hydraulics | |
|---|---|
Type | open center |
Gear Pump flow | 5.88 gpm
22.3 lpm |
Hydro Pump flow | 6.3 gpm
23.8 lpm |
Gear Steering flow | 3.07 gpm
11.6 lpm |
Hydro Steering flow | 4.55 gpm
17.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position control |
Gear Rear lift | 2075 lbs
941 kg |
Hydro Rear lift | 2080 lbs
943 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic |
Rear PTO Type | 540 |
Engine RPM | 540@2541 (gear) |
540@2775 (hydro) | |
Mid PTO | independent (hydro only) |
Clutch | electro-hydraulic |
Mid PTO Type | 2000 |
Engine RPM | 2000@2650 |
Dimensions & Tires | |
|---|---|
Weight | 3064 lbs
1389 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 50 |
Charging volts | 12 |
Battery volts | 12 |
Battery AH | 75 |
Engine
Engine Detail — 85 ci / 1.4 L Diesel
Manufacturer | Daedong 3A139 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 85 ci
1.4 L |
Bore/Stroke | 3.15x3.64 inches
80 x 92 mm |
Power | 28 hp
20.9 kW |
Fuel system | indirect injection |
Compression | 22:1 |
Rated RPM | 2700 |
Starter volts | 12 |
Mahindra 2810 Engine | |
|---|---|
 |
Transmission
Transmission options | |
|---|---|
12-speed synchomesh shuttle | |
hydrostatic |
Transmission — 12 forward and reverse synchomesh shuttle
Type | synchomesh shuttle |
Gears | 12 forward and reverse |
Clutch | dry disc |
Transmission — infinite forward and reverse (3-range) hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse (3-range) |
Dimensions
Mahindra 2810 Tires |
|---|
Dimensions | |
|---|---|
Gear Length | 124 inches
314 cm |
Hydro Length | 114 inches
289 cm |
Width | 52 inches
132 cm |
Weight | 3064 lbs
1389 kg |
Photos
Mahindra 2810 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Mahindra 2810 based on its 28 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Mahindra 2810.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Mahindra 2810 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Mahindra 2810.
Converted Equivalents:
Horsepower (HP)28 hp
Kilowatts (kW)20.9 kW
Metric Horsepower (PS / CV)28.4 PS
Direct Competitor Comparison
Compare Mahindra 2810 against same-era industry alternatives in the same horsepower class.
Current Model
Mahindra
Mahindra 2810
Engine Power:Diesel (listed): 28 hp / 20.9 kW
★ Baseline Reference
Related models
Mahindra 2415
- Power:
- 24
- Production years:
- 2007 - 2008
Mahindra eMax 25
- Power:
- 24
- Production years:
- 2014 - 2016
Mahindra eMax 25L
- Power:
- 24
- Production years:
- 2019 - 2023
Mahindra Max 25XL
- Power:
- 24
- Production years:
- 2018 - 2023
Mahindra Max 24
- Power:
- 24.4
- Production years:
- 2014 - 2019