Mahindra 6010

The Mahindra 6010 is a tractor produced by Mahindra. It is equipped with a 148.6 ci 2.4 L engine. The listed engine power is Diesel (listed): 59 hp / 44.0 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 4,144 lbs 1879 kg.

Engine Power
Diesel (listed): 59 hp / 44.0 kW
Fuel & Capacities
16 gal 60.6 L
Transmission
infinite forward and reverse (3-range)
Operating Weight
4,144 lbs 1879 kg

Overview

Mahindra 6010 tractor photo
2011 - 2015 10 SeriesCompact Utility tractor 10 Series Compact Utility tractor
Production
Manufacturer
Mahindra
Compact Utility tractor
Mahindra 6010 Engine
Daedong 2.4L 4-cyl diesel
Fuel tank
16 gal 60.6 L
Engine details ...
Mahindra 6010 Transmission
hydrostatic
Transmission details ...
Mahindra 6010 Power
Engine
59 hp 44.0 kW
PTO (claimed)
44 hp 32.8 kW
Mechanical
Four-wheel drive
Steering
hydrostatic power
Wet disc brakes
Cab standard with air-conditioning.
Hydraulics
Type
open center
Valves
1
Pump flow
9.5 gpm 36.0 lpm
Steering flow
5 gpm 18.9 lpm
Tractor hitch
Rear Type
1
Control
position control
Rear lift
3,314 lbs 1503 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540
Dimensions & Tires
Weight
4,144 lbs 1879 kg
Front tire
9.5x16
Rear tire
14.9x24
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
50
Batteries
12
Battery volts
12
Battery AH
80
References
6010 references literature
10 Series published in 2014, by Mahindra

Engine

Engine Detail — 148.6 ci / 2.4 L Diesel

Manufacturer
Daedong
Configuration
turbocharged diesel, 4-cylinder, liquid-cooled
Displacement
148.6 ci 2.4 L
Bore/Stroke
3.43x4.03 inches 87 x 102 mm
Power
59 hp 44.0 kW
Fuel system
direct injection
Compression
22:1
Rated RPM
2600
Starter
electric
Starter volts
12

Transmission

Transmission — infinite forward and reverse (3-range) hydrostatic

Type
hydrostatic
Gears
infinite forward and reverse (3-range)

Dimensions

Mahindra 6010 Tires
Standard tires (ag)
Front: 9.5x16. Rear: 14.9x24
Industrial front
12x16.5
Industrial rear
16.9x24
Dimensions
Length
135.3 inches 343 cm
Width
71.1 inches 180 cm
Height (cab)
98.4 inches 249 cm
Operating weight
4,144 lbs 1879 kg

Photos

Mahindra 6010 tractor photo

Mahindra 6010 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mahindra 6010 based on its 59 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
Small Square Baler (14x18")小方捆打捆机 (36x46 cm)Medium DutyClassic 2-string baler for horse and small livestock hay.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mahindra 6010.

Estimated Continuous Field Runtime: 5.2 hrs

Approximately 5.2 hours of continuous field operation at ~75% rated power on a full tank (16 gal / 60.6 L).

Estimated 75% Load Fuel Burn~3.1 gal/hr (11.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Mahindra 6010 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Mahindra 6010.

Converted Equivalents:

Horsepower (HP)59 hp
Kilowatts (kW)44 kW
Metric Horsepower (PS / CV)59.8 PS

Direct Competitor Comparison

Compare Mahindra 6010 against same-era industry alternatives in the same horsepower class.

Current Model
Mahindra

Mahindra 6010

Engine Power:Diesel (listed): 59 hp / 44.0 kW
★ Baseline Reference
DeereMarket Competitor

Deere 4520

Engine Power:53.1
Production Years:2005 - 2014
New HollandMarket Competitor

New Holland T3040

Engine Power:53.5
Production Years:2007 - 2010
Massey FergusonMarket Competitor

Massey Ferguson 1754

Engine Power:53.6
Production Years:2013 - 2018
International HarvesterMarket Competitor

International Harvester 485

Engine Power:53.6
Production Years:1981 - 1985