Massey Ferguson 1210

The Massey Ferguson 1210 is a tractor produced by Massey Ferguson. It is equipped with a 61.4 ci 1.0 L engine. Transmission: 9 forward and 3 reverse. Operating weight: 1433 to 1610 pounds.

Fuel & Capacities

4.75 gal 18.0 L

Transmission

9 forward and 3 reverse

Operating Weight

1433 to 1610 pounds

Overview

	1993 - 1995 1200 Compact SeriesCompact Utility tractorIseki built 1200 Compact Series Compact Utility tractor Iseki built

Production
Distributor	Massey Ferguson
Manufacturer	Iseki
Compact Utility tractor
Built in Japan
Original price was $10,500 in 1996

Variants
TF173	similar Iseki model

Massey Ferguson 1210 Engine
Iseki 1.0L 3-cyl diesel
Engine details ...

Massey Ferguson 1210 Power
Gear PTO (claimed)	15 hp 11.2 kW
Hydro PTO (claimed)	14 hp 10.4 kW

Mechanical
Two- or four-wheel drive
Final drives	spur gear
Differential lock	mechanical rear
Steering	manual
Steering	power OptOptional
Mechanical wet disc brakes
Two-post folding ROPS.

Capacity
Fuel	4.75 gal 18.0 L
Hydraulic system	2.64 gal 10.0 L

Hydraulics
Type	open center
Capacity	2.64 gal 10.0 L
Pump flow	5.2 gpm 19.7 lpm
Total flow	7.7 gpm 29.1 lpm
Steering flow	2.5 gpm 9.5 lpm

Tractor hitch
Rear Type	I
Control	position control
Rear lift (at ends)	1210 lbs 548 kg
Rear lift (at 24"/610mm)	882 lbs 400 kg

Power Take-off (PTO)
Rear PTO	transmission
Clutch	dry disc
Rear PTO Type	540 (1.375)
Engine RPM	540@2307
Mid PTO Type	2000

Dimensions & Tires
Wheelbase	59.4 inches 150 cm
Weight	1433 to 1610 pounds
Front tire	4.50-10
2WD Rear tire	8-16
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	40
Battery CCA	325
Battery volts	12

References

MF 1200 Series Tractors published in 1993, by Massey Ferguson
MF 1210/1220/1230 Training Manual (1449259M23768270M1) published in 1992

Engine

Engine Detail — 61.4 ci / 1.0 L Diesel

Manufacturer	Iseki E3100
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled inline
Displacement	61.4 ci 1.0 L
Bore/Stroke	2.913x3.070 inches 74 x 78 mm
Maximum Power (net)	17.4 hp 13.0 kW
Fuel system	indirect injection
Air cleaner	dry
Pre-heating	glow plugs
Compression	22.5:1
Rated RPM	2500
Idle RPM	950-2750
Torque	41.5 lb-ft 56.3 Nm
Torque RPM	1800
Starter	electric
Starter volts	12
Oil capacity	3.3 qts 3.1 L
Coolant capacity	5.4 qts 5.1 L

Transmission

Transmission options
6-speed gear
hydrostatic
9-speed creeper

Transmission — 6 forward and 2 reverse gear

Type	gear
Gears	6 forward and 2 reverse
Clutch	184mm dry disc
Oil capacity	10.6 qts 10.0 L
Three gears, plus reverse, in two ranges. Tractor must be stopped, and clutch used, to shift gear or range.
With 8-16 R1 rear tires.

Transmission — infinite forward and reverse (2-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (2-range)
With 8-16 R1 rear tires.

Transmission — 9 forward and 3 reverse creeper

Type	creeper
Gears	9 forward and 3 reverse
Optional additional creeper range for the standard transmission.
With 8-16 R1 rear tires.

Dimensions

Massey Ferguson 1210 Tires
2WD Standard tires (ag)	Front: 4.50-10. Rear: 8-16
4WD Standard tires (ag)	Front: 5.00-12. Rear: 8-16
Lawn/turf front	24x8.50-12
Lawn/turf rear	315x75D-15

Dimensions
Wheelbase	59.4 inches 150 cm
Length	108.3 inches 275 cm
Width	40.9 inches*Minimum width 103 cm
Height (Folded ROPS)	59.5 inches 151 cm
Ground clearance	10 inches 25 cm
2WD Front tread	32.7/36.2 inches 83/91 cm
4WD Front tread	32.7 inches 83 cm
Rear tread	33.5/39.4 inches 85/100 cm

Massey Ferguson 1210 Weight
2WD Gear Shipping	1433 lbs 650 kg
2WD Hydro Shipping	1455 lbs 659 kg
4WD Gear Shipping	1588 lbs 720 kg
4WD Hydro Shipping	1610 lbs 730 kg
2WD Max capacity	3181 lbs 1442 kg
4WD Max capacity	3582 lbs 1624 kg

Photos

Massey Ferguson 1210 tractor photo

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 1210.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours