Massey Ferguson 261

The Massey Ferguson 261 is a tractor produced by Massey Ferguson. It is equipped with a 236 ci 3.9 L engine. The listed engine power is Diesel (listed): 60 hp / 44.7 kW. Transmission: 8 forward and 2 reverse. Operating weight: 5,380 lbs 2440 kg.

Engine Power

Diesel (listed): 60 hp / 44.7 kW

Fuel & Capacities

21 gal 79.5 L

Transmission

8 forward and 2 reverse

Operating Weight

5,380 lbs 2440 kg

Overview

	1992 - 1997 200 SeriesUtility tractorUrsus built 200 Series Utility tractor Ursus built

Production
Distributor	Massey Ferguson
Manufacturer	Ursus
Utility tractor
Built in Poland
Original price	$16,400 (1997)

Massey Ferguson 261 Engine
Perkins 3.9L 4-cyl diesel
Engine details ...

Massey Ferguson 261 Transmission
8-speed sliding gear
Transmission details ...

Massey Ferguson 261 Power
Engine	60 hp 44.7 kW
PTO (claimed)	53 hp 39.5 kW

Mechanical
Two-wheel drive
Steering	hydrostatic power
Wet disc brakes
Two-post ROPS.

Capacity
Fuel	21 gal 79.5 L
Hydraulic system	11 gal 41.6 L

Hydraulics
Type	open
Capacity	11 gal 41.6 L

Tractor hitch
Rear Type	II/I
Control	position and draft control

Power Take-off (PTO)
Rear PTO	live (two-stage clutch)
Rear PTO Type	540

Dimensions & Tires
Wheelbase	87.5 inches 222 cm
Weight	5,380 lbs 2440 kg
Front tire	7.50-16
Rear tire	16.9-30
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

MF 200 Series published in 1994, by Massey Ferguson

Engine

Engine Detail — 236 ci / 3.9 L Diesel

Manufacturer	Perkins AD4.236
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	236 ci 3.9 L
Bore/Stroke	3.875x5.00 inches 98 x 127 mm
Power	60 hp 44.7 kW
Air cleaner	oil bath
Rated RPM	2000
Starter volts	12
Coolant capacity	14.8 qts 14.0 L

Transmission

Transmission — 8 forward and 2 reverse sliding gear

Type	sliding gear
Gears	8 forward and 2 reverse
Tractor must be stopped, and clutch used, to shift gears.

Dimensions

Massey Ferguson 261 Tires
Ag front	7.50-16
Ag rear	16.9-30

Dimensions
Wheelbase	87.5 inches 222 cm
Length	148 inches 375 cm
Width	75.9 inches 192 cm
Height (ROPS)	96.5 inches 245 cm
Weight	5,380 lbs 2440 kg
Ground clearance	13.4 inches 34 cm

Photos

Massey Ferguson 261

Massey Ferguson 261 operator station and controls.

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 261 based on its 60 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 261.

Estimated Continuous Field Runtime: 6.7 hrs

Approximately 6.7 hours of continuous field operation at ~75% rated power on a full tank (21 gal / 79.5 L).

Estimated 75% Load Fuel Burn~3.1 gal/hr (11.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours