Massey Ferguson 263

The Massey Ferguson 263 is a tractor produced by Massey Ferguson. It is equipped with a 165 ci 2.7 L engine. The listed engine power is Diesel (net): 60 hp / 44.7 kW. Transmission: 8 forward and reverse. Operating weight: 4915 to 5315 pounds.

Engine Power

Diesel (net): 60 hp / 44.7 kW

Fuel & Capacities

12.6 gal 47.7 L

Transmission

8 forward and reverse

Operating Weight

4915 to 5315 pounds

Overview

	1998 - 1999 200 Three SeriesUtility tractor 200 Three Series Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor
Built in Coventry, England
Original price was $25,000 in 1999

Massey Ferguson 263 Engine
Perkins 2.7L 3-cyl diesel
Engine details ...

Massey Ferguson 263 Power
Engine (net)	60 hp 44.7 kW
PTO (claimed)	53 hp 39.5 kW
Drawbar (tested)	42.4 hp 31.6 kW
PTO (tested)	53.0 hp 39.5 kW
Performance test details ...

Mechanical
Two- or four-wheel drive
Differential lock	mechanical rear
Power steering
Independent mechanical wet disc brakes
Two-post folding ROPS.

Capacity
Fuel	12.6 gal 47.7 L
Hydraulic system	11.4 gal 43.1 L

Hydraulics
Type	open center
Capacity	11.4 gal 43.1 L
Pressure	2610 psi 180.0 bar
Valves	2
Pump flow	9.5 gpm 36.0 lpm
	13.9 gpmOptOptional 52.6 lpm

Tractor hitch
Rear Type	II/I
Control	position and draft control
Rear lift (at ends)	3500 lbs 1587 kg
Rear lift (at 24"/610mm)	2621 lbs 1188 kg

Power Take-off (PTO)
2WD Rear PTO	live
4WD Rear PTO	independent
Rear PTO Type	540
Engine RPM	540@1789

Dimensions & Tires
2WD Wheelbase	77 inches 195 cm
4WD Wheelbase	76 inches 193 cm
Weight	4915 to 5315 pounds
Front tire	6.00-16
2WD Rear tire	13.6-28
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	45
Battery CCA	420
Battery volts	12

References

MF Loaders for Compact & Agricultural Tractors published in 2003, by Massey Ferguson
MF 263-2/4WD Tractor published in 1998, by Massey Ferguson

Engine

Engine Detail — 165 ci / 2.7 L Diesel

Manufacturer	Perkins 903.27T
Configuration	turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	165 ci 2.7 L
Bore/Stroke	3.74x5.00 inches 95 x 127 mm
Power (net)	60 hp 44.7 kW
Air cleaner	dual paper elements
Pre-heating	thermostart
Compression	17.3:1
Rated RPM	2250
Torque	145 lb-ft 196.6 Nm
Torque RPM	1400
Starter volts	12
Oil capacity	7.2 qts 6.8 L
Coolant capacity	10.8 qts 10.2 L

Transmission

Transmission options
8-speed sliding gear
8-speed synchro shuttle

Transmission — 8 forward and 2 reverse sliding gear

Type	sliding gear
Gears	8 forward and 2 reverse
Clutch	dry disc
Four gears (1-4) plus reverse (R) in two ranges (low/high)

Transmission — 8 forward and reverse synchro shuttle

Type	synchro shuttle
Gears	8 forward and reverse
Clutch	dry disc
Four gears (1-4) in two ranges (low/high) with synchronized shuttle shifting.

Dimensions

Massey Ferguson 263 Tires
2WD Standard tires (ag)	Front: 6.00-16. Rear: 13.6-28
4WD Standard tires (ag)	Front: 260/80R-20. Rear: 14.9-28
2WD Ag front	9.00-10
2WD Ag front	9.5L-15
2WD Ag front	11L-15
2WD Ag front	6.5-16
2WD Ag rear	18.4-16.1
2WD Ag rear	14.9-24
2WD Ag rear	14.9-28
4WD Lawn/turf front	10.5/80-18
4WD Lawn/turf rear	14.9-24

Dimensions
2WD Wheelbase	77 inches 195 cm
4WD Wheelbase	76 inches 193 cm
2WD Length	132 inches 335 cm
4WD Length	134 inches 340 cm
Width	71.5 inches 181 cm
Height (ROPS)	74.5 inches 189 cm
Height (Folded ROPS)	72.5 inches 184 cm
Ground clearance	13.5 inches 34 cm
2WD Front tread	48 to 72 inches 121 to 182 cm
4WD Front tread	51.4 to 63.6 inches 130 to 161 cm
2WD Rear tread	56 to 84 inches 142 to 213 cm
4WD Rear tread	56 to 72 inches 142 to 182 cm

Massey Ferguson 263 Weight
2WD	4915 lbs 2229 kg
4WD	5315 lbs 2410 kg
4WD Operating	5110 lbs 2317 kg

Tests

OCED Tractor Test 1850
Diesel 8-speed shuttle 4WD May 1 - June 1, 1999 Link: OCED Tractor Test 1850 file
PTO performance
Power at rated engine speed	53.0 hp 39.5 kW
Fuel use	3.6 gal/hour 13.6 l/hour
Power at rated PTO speed	49.2 hp 36.7 kW
Fuel use	3.0 gal/hour 11.4 l/hour
Drawbar performance
Max power	42.4 hp 31.6 kW
Fuel use	3.5 gal/hour 13.2 l/hour
Gear 5 used for power test.
Max pull	4520 lbs 2050 kg
Gear 3L used for pull test.

Attachments

Attachment overview
Massey Ferguson 232 loader
Massey Ferguson 1032 loader
The model 232 loader was compatible with the Massey Ferguson 243 with two-wheel drive. The model 1032 loader was compatible with four-wheel drive.

Photos

Massey Ferguson 263

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 263 based on its 60 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 263.

Estimated Continuous Field Runtime: 4 hrs

Approximately 4 hours of continuous field operation at ~75% rated power on a full tank (12.6 gal / 47.7 L).

Estimated 75% Load Fuel Burn~3.1 gal/hr (11.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours