Massey Ferguson 5410

The Massey Ferguson 5410 is a tractor produced by Massey Ferguson. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 73.8 hp / 55.0 kW. Transmission: Dyna-4. Operating weight: 8157 lbs 3700 kg.

Engine Power

Diesel (listed): 73.8 hp / 55.0 kW

Fuel & Capacities

34.3 gal 129.8 L

Transmission

Dyna-4

Operating Weight

8157 lbs 3700 kg

Overview

	2011 - 2013 5400 Series

Production
Manufacturer	Massey Ferguson (a part of AGCO)

Massey Ferguson 5410 Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	34.3 gal 129.8 L
Engine details ...

Massey Ferguson 5410 Transmission
16-speed four-speed power shift
Transmission details ...

Massey Ferguson 5410 Power
Engine	73.8 hp 55.0 kW

Mechanical
Four-wheel drive
Differential lock	standard
Power steering
Hydraulic wet disc brakes
Cab standard with heater. Optional Visio roof.

Hydraulics
Pressure	2900 psi 200.0 bar
Valves	2 to 4
Pump flow	15.3 gpm 57.9 lpm
	26.4 gpm*Optional Twin Flow system 99.9 lpm
Total flow	23.8 gpm 90.1 lpm
Steering flow	8.5 gpm 32.2 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift (at ends)	9480 lbs 4300 kg
Front lift	5512 lbs 2500 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/540E (1.375)
	540/1000 OptOptional
Engine RPM	540@1980
	540E@1550
	1000@2000
Front PTO	independent
Front PTO Type	1000 (1.375)

Dimensions & Tires
Wheelbase	96.9 inches 246 cm
Weight	8157 lbs 3700 kg
Front tire	11.2R24
Rear tire	16.9R30
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

References

MF 5400 published in 2012, by Massey Ferguson

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins 1104D-44T
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.13x5.00 inches 105 x 127 mm
Power	73.8 hp 55.0 kW
Torque	228.6 lb-ft 310.0 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission — Dyna-4

Transmission	Dyna-4
Type	four-speed power shift
Gears	16 forward and reverse

Dimensions

Massey Ferguson 5410 Tires
Standard tires (ag)	Front: 11.2R24. Rear: 16.9R30

Dimensions
Wheelbase	96.9 inches 246 cm
Length	166.2 inches 422 cm
Weight	8157 lbs 3700 kg

Massey Ferguson 5410 Height
Cab	106.6 inches (standard) 270 cm
	98.7 inches (slimline low-profile) 250 cm
	103.4 inches (Visio low-profile) 262 cm

Photos

Massey Ferguson 5410

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 5410 based on its 73.8 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 5410.

Estimated Continuous Field Runtime: 8.9 hrs

Approximately 8.9 hours of continuous field operation at ~75% rated power on a full tank (34.3 gal / 129.8 L).

Estimated 75% Load Fuel Burn~3.8 gal/hr (14.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours