Massey Ferguson 565

The Massey Ferguson 565 is a tractor produced by Massey Ferguson. It is equipped with a 235.6 ci 3.9 L engine. The listed engine power is Diesel (listed): 60 hp / 44.7 kW. Transmission: Multi-Power. Operating weight: 6106 lbs 2769 kg.

Engine Power

Diesel (listed): 60 hp / 44.7 kW

Fuel & Capacities

20.9 gal 79.1 L

Transmission

Multi-Power

Operating Weight

6106 lbs 2769 kg

Overview

	1977 - 1982 500 SeriesRow-Crop tractor 500 Series Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor
Built in Coventry, England

Massey Ferguson 565 Engine
Perkins 3.9L 4-cyl diesel
Fuel tank	20.9 gal 79.1 L
Engine details ...

Massey Ferguson 565 Power
Engine	60 hp 44.7 kW
PTO (claimed)	56.2 hp 41.9 kW

Mechanical
Two-wheel drive
Power steering
Wet disc brakes
Cab standard with heater. ROPS available.

Hydraulics
Pressure	2000 psi 137.9 bar
Pump flow	9.5 gpm 36.0 lpm
Total flow	16.5 gpm 62.5 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift (at ends)	3400 lbs 1542 kg

Power Take-off (PTO)
Rear PTO	live
	independent optional
Clutch	mechanical dry disc (live)
	hydraulic (independent)
Rear PTO Type	540 (1.375)
	1000 (1.375)

Dimensions & Tires
Wheelbase	88.5 inches 224 cm
Weight	6106 lbs 2769 kg
Front tire	7.50-16
Rear tire	16.9/14-30
Full dimensions and tires ...

References

New Tractor Line 500-Series published by Massey Ferguson
565 published by Massey Ferguson

Engine

Engine Detail — 235.6 ci / 3.9 L Diesel

Manufacturer	Perkins A4.236
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	235.6 ci 3.9 L
Bore/Stroke	3.875x5.00 inches 98 x 127 mm
Power	60 hp 44.7 kW
Air cleaner	dry
Compression	16:1
Rated RPM	2000
Torque	169.6 lb-ft 230.0 Nm
Torque RPM	2000
Starter type	electric
Oil capacity	7.5 qts 7.1 L
Coolant capacity	15 qts 14.2 L

Transmission

Transmission options
8-speed gear
12-speed two-speed power shift

Transmission — 8 forward and 2 reverse gear

Type	gear
Gears	8 forward and 2 reverse
Four gears, plus reverse, in high and low ranges.

Transmission — Multi-Power

Transmission	Multi-Power
Type	two-speed power shift
Gears	12 forward and 4 reverse
Three gears in low and high ranges with two-speed Multi-Power power shift.

Dimensions

Massey Ferguson 565 Tires
Ag front	7.50-16
Ag rear	16.9/14-30
Ag front	6.00-19
Ag rear	12.4/11-36
	14.9/13-28

Dimensions
Wheelbase	88.5 inches 224 cm
Length	148.5 inches 377 cm
Width	73 inches 185 cm
Height (cab)	95 inches 241 cm
Operating weight	6106 lbs 2769 kg
Clearance (drawbar)	12.9 inches 32 cm

Photos

Massey Ferguson 565

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 565 based on its 60 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 565.

Estimated Continuous Field Runtime: 6.7 hrs

Approximately 6.7 hours of continuous field operation at ~75% rated power on a full tank (20.9 gal / 79.1 L).

Estimated 75% Load Fuel Burn~3.1 gal/hr (11.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours