McCormick Intl MC110

The McCormick Intl MC110 is a tractor produced by Mccormick Intl. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 100.6 hp / 75.0 kW. Transmission: 16 forward and 12 reverse. Operating weight: 10681 lbs 4844 kg.

Engine Power

Diesel (listed): 100.6 hp / 75.0 kW

Fuel & Capacities

51.8 gal 196.1 L

Transmission

16 forward and 12 reverse

Operating Weight

10681 lbs 4844 kg

Overview

	2008 - 2013 MC SeriesUtility tractor MC Series Utility tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Utility tractor
Built in Italy

McCormick Intl MC110 Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	51.8 gal 196.1 L
Engine details ...

McCormick Intl MC110 Transmission
16-speed four-speed power shift
Transmission details ...

McCormick Intl MC110 Power
Engine	100.6 hp 75.0 kW
PTO (claimed)	82.5 hp 61.5 kW

Mechanical
Four-wheel drive
Final drives	electro-hydraulic rear
Power steering
Hydraulic wet disc brakes
Cab standard with air-conditioning.

Hydraulics
Type	closed center
Valves	2 or 3
Pump flow	28.8 gpm 109.0 lpm

Tractor hitch
Rear Type	IIIN
Rear lift	12943 lbs 5870 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic wet disc
Rear PTO Type	540/1000 (1.375)

Dimensions & Tires
Wheelbase	99 inches 251 cm
Weight	10681 lbs 4844 kg
Front tire	380/85R28
Rear tire	460/85R38
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

References

MC published in 2008, by McCormick

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins 1104D-44TA
Configuration	turbocharged aftercooled diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.13x5.00 inches 105 x 127 mm
Emissions	Tier 3
Power	100.6 hp 75.0 kW
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission — 16 forward and 12 reverse four-speed power shift

Type	four-speed power shift
Gears	16 forward and 12 reverse
Four power shift gears in four ranges with power shuttle. Optional AutoSpeed offers push-button shifting and programmable gear selection.

Dimensions

McCormick Intl MC110 Tires
Standard tires (ag)	Front: 380/85R28. Rear: 460/85R38

Dimensions
Wheelbase	99 inches 251 cm
Length	174.1 inches 442 cm
Width	90.6 inches 230 cm
Height (cab)	109.8 inches 278 cm
	102 inches (low-profile cab) 259 cm
Shipping weight	10681 lbs 4844 kg
Clearance (drawbar)	15 inches 38 cm

Photos

McCormick Intl MC110 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl MC110 based on its 100.6 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl MC110.

Estimated Continuous Field Runtime: 9.9 hrs

Approximately 9.9 hours of continuous field operation at ~75% rated power on a full tank (51.8 gal / 196.1 L).

Estimated 75% Load Fuel Burn~5.2 gal/hr (19.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours