McCormick Intl MTX125

The McCormick Intl MTX125 is a tractor produced by Mccormick Intl. It is equipped with a 365 ci 6.0 L engine. The listed engine power is Diesel (listed): 130 hp / 96.9 kW. Transmission: 32 forward and 24 reverse. Operating weight: 12020 to 13620 pounds.

Engine Power

Diesel (listed): 130 hp / 96.9 kW

Fuel & Capacities

70 gal 264.9 L

Transmission

32 forward and 24 reverse

Operating Weight

12020 to 13620 pounds

Overview

	2000 - 2003 MTX SeriesRow-Crop tractor MTX Series Row-Crop tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Row-Crop tractor
Built in Doncaster, England

McCormick Intl MTX125 Engine
Perkins 6.0L 6-cyl diesel
Fuel tank	70 gal 264.9 L
Engine details ...

McCormick Intl MTX125 Power
Engine	130 hp 96.9 kW
Drawbar (claimed)	99 hp 73.8 kW
PTO (claimed)	112 hp 83.5 kW
Drawbar (tested)	99.1 hp 73.9 kW
PTO (tested)	114.1 hp 85.1 kW
Performance test details ...

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic rear
Power steering
Hydraulic wet disc brakes
Cab standard with air-conditioning.

Hydraulics
Type	pressure flow compensating
Pump flow	28.8 gpm 109.0 lpm
SCV flow	25.1 gpm 95.0 lpm

Tractor hitch
Rear Type	II
Control	electronic lower link draft sensing
Rear lift (at 24"/610mm)	8201 lbs 3719 kg
	10180 lbs (optional) 4617 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@1877
	1000@2200

Dimensions & Tires
Wheelbase	106.3 inches 270 cm
Weight	12020 to 13620 pounds
Front tire	14.9R28
Rear tire	18.4R38
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	95
Battery volts	12

References

MTX Series published in 2000, by McCormick

Engine

Engine Detail — 365 ci / 6.0 L Diesel

Manufacturer	Perkins 1006-60T
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled inline
Displacement	365 ci 6.0 L
Bore/Stroke	3.937x5.00 inches 100 x 127 mm
Power	130 hp 96.9 kW
Air cleaner	dual paper elements
Compression	17.2:1
Rated RPM	2200
Torque	380.6 lb-ft 516.1 Nm
Torque RPM	1400
Starter	electric
Starter volts	12
Oil change	300 h

Transmission

Transmission options
16-speed four-speed power shift
32-speed creeper

Transmission — 16 forward and 12 reverse four-speed power shift

Type	four-speed power shift
Gears	16 forward and 12 reverse
Clutch	electro-hydraulic wet disc
Four power shift gears in four ranges.
Transmission
Type	creeper
Gears	32 forward and 24 reverse

Dimensions

McCormick Intl MTX125 Tires
Ag front	14.9R28
Ag rear	18.4R38

Dimensions
Wheelbase	106.3 inches 270 cm
Length	203.2 inches 516 cm
Width	90.6 inches 230 cm
Height (cab)	113.4 inches 288 cm

McCormick Intl MTX125 Weight
	13620 lbs 6178 kg
Shipping	12020 lbs 5452 kg
Max front axle	13450 lbs 6100 kg
Max rear axle	20940 lbs 9498 kg

Tests

OCED Tractor Test 2098
Diesel 16-speed 4WD February 2002 - March 2002, Link: OCED Tractor Test 2098 file
PTO performance
Max power	114.1 hp 85.1 kW
Fuel use	7.1 gal/hour 26.9 l/hour
Power at rated engine speed	112.0 hp 83.5 kW
Fuel use	7.6 gal/hour 28.8 l/hour
Drawbar performance
Max power	99.1 hp 73.9 kW
Fuel use	7.7 gal/hour 29.1 l/hour
Max pull	14410 lbs 6536 kg

Photos

McCormick Intl MTX125

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl MTX125 based on its 130 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl MTX125.

Estimated Continuous Field Runtime: 10.4 hrs

Approximately 10.4 hours of continuous field operation at ~75% rated power on a full tank (70 gal / 265 L).

Estimated 75% Load Fuel Burn~6.8 gal/hr (25.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours