McCormick Intl MTX145

The McCormick Intl MTX145 is a tractor produced by Mccormick Intl. It is equipped with a 410.6 ci 6.7 L engine. The listed engine power is Diesel (listed): 133 hp / 99.2 kW. Transmission: 16 forward and 13 reverse. Operating weight: 11,905 lbs 5400 kg.

Engine Power

Diesel (listed): 133 hp / 99.2 kW

Fuel & Capacities

70 gal 264.9 L

Transmission

16 forward and 13 reverse

Operating Weight

11,905 lbs 5400 kg

Overview

	2009 - ????	2009 - ????

2009 - ????

Production
Manufacturer	McCormick Intl

McCormick Intl MTX145 Engine
6.7L 6-cyl diesel
Fuel tank	70 gal 264.9 L
Engine details ...

McCormick Intl MTX145 Power
Engine	133 hp 99.2 kW
PTO (claimed)	120 hp 89.5 kW

Mechanical
Four-wheel drive
Wet disc brakes
Cab standard with heat and air-conditioning.

Hydraulics
Total flow	29 gpm 109.8 lpm

Tractor hitch
Rear Type	IIIN
Rear lift	12,943 lbs 5870 kg
	14,555 lbs (optional) 6602 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	107 inches 271 cm
Weight	11,905 lbs 5400 kg
Front tire	420/85R28
Rear tire	520/85R38
Full dimensions and tires ...

Engine

	2009 - ????	2009 - ????

2009 - ????

Engine Detail — 410.6 ci / 6.7 L Diesel

Configuration	turbocharged diesel, 6-cylinder, liquid-cooled
Displacement	410.6 ci 6.7 L
Power	133 hp 99.2 kW
Rated RPM	2200
Torque	435 lb-ft 589.9 Nm
Torque RPM	1250

Transmission

	2009 - ????	2009 - ????

2009 - ????

Transmission options
16-speed partial power shift
32-speed partial power shift

Transmission — 16 forward and 12 reverse partial power shift

Type	partial power shift
Gears	16 forward and 12 reverse
Four ranges with four power shift gears in each range.

Transmission — 32 forward and 24 reverse partial power shift

Type	partial power shift
Gears	32 forward and 24 reverse
Four ranges with four power shift gears in each range plus creeper.

Transmission — 16 forward and 13 reverse partial power shift

Type	partial power shift
Gears	16 forward and 13 reverse

Dimensions

	2009 - ????	2009 - ????

2009 - ????

McCormick Intl MTX145 Tires
Ag front	420/85R28
Ag rear	520/85R38

Dimensions
Wheelbase	107 inches 271 cm
Length	203 inches 515 cm
Width	90 inches 228 cm
Height (cab)	114 inches 289 cm
Shipping weight	11,905 lbs 5400 kg
Ground clearance	20 inches 50 cm

Photos

McCormick Intl MTX145 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl MTX145 based on its 133 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl MTX145.

Estimated Continuous Field Runtime: 10.1 hrs

Approximately 10.1 hours of continuous field operation at ~75% rated power on a full tank (70 gal / 265 L).

Estimated 75% Load Fuel Burn~6.9 gal/hr (26.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours