McCormick Intl MTX200

The McCormick Intl MTX200 is a tractor produced by Mccormick Intl. It is equipped with a 359 ci 5.9 L engine. The listed engine power is Diesel (listed): 204 hp / 152.1 kW. Transmission: powershift. Operating weight: 17000 lbs 7711 kg.

Engine Power

Diesel (listed): 204 hp / 152.1 kW

Fuel & Capacities

91.7 gal 347.1 L

Transmission

powershift

Operating Weight

17000 lbs 7711 kg

Overview

	2003 - 2005 MTX SeriesRow-Crop tractor MTX Series Row-Crop tractor

Production
Manufacturer	McCormick Intl
Row-Crop tractor
Built in Doncaster, England

McCormick Intl MTX200 Engine
Cummins 5.9L 6-cyl diesel
Fuel tank	91.7 gal 347.1 L
Engine details ...

McCormick Intl MTX200 Power
Engine	204 hp 152.1 kW
PTO (claimed)	170 hp 126.8 kW

Mechanical
Four-wheel drive
Steering	hydrostatic power
Differential hydraulic wet disc brakes
Cab standard with air-conditioning.

Hydraulics
Type	pressure flow compensating
Pump flow	32.0 gpm 121.1 lpm

Tractor hitch
Rear Type	III
Control	electronic lower link draft sensing
Rear lift	24144 lbs 10951 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	112.99 inches 286 cm
Weight	17000 lbs 7711 kg
Front tire	640/65R30
Rear tire	650/65R42
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	95
	120 (optional)
Battery volts	12

Engine

Engine Detail — 359 ci / 5.9 L Diesel

Manufacturer	Cummins QSB
Configuration	turbocharged diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	359 ci 5.9 L
Bore/Stroke	4.02x4.72 inches 102 x 120 mm
Power	204 hp 152.1 kW
Rated RPM	2200
Torque	590 lb-ft 800.0 Nm
Torque RPM	1200
Starter volts	12

Transmission

Transmission options
16-speed
32-speed

Transmission — powershift

Transmission	powershift
Gears	16 forward and 12 reverse

Transmission — 32 forward and 24 reverse

Gears

32 forward and 24 reverse

Dimensions

McCormick Intl MTX200 Tires
Ag front	640/65R30
Ag rear	650/65R42

Dimensions
Wheelbase	112.99 inches 286 cm
Length	205.91 inches 523 cm
Weight	17000 lbs 7711 kg

Photos

McCormick Intl MTX200 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl MTX200 based on its 204 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl MTX200.

Estimated Continuous Field Runtime: 8.6 hrs

Approximately 8.6 hours of continuous field operation at ~75% rated power on a full tank (91.7 gal / 347.1 L).

Estimated 75% Load Fuel Burn~10.6 gal/hr (40.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours