McCormick Intl X10.55M

The McCormick Intl X10.55M is a tractor produced by Mccormick Intl. It is equipped with a 134.1 ci 2.2 L engine. The listed engine power is Diesel (gross): 54 hp / 40.3 kW. Transmission: 12 forward and reverse. Operating weight: 4,795 lbs (ROPS) 2175 kg.

Engine Power

Diesel (gross): 54 hp / 40.3 kW

Fuel & Capacities

18 gal 68.1 L

Transmission

12 forward and reverse

Operating Weight

4,795 lbs (ROPS) 2175 kg

Overview

	2011 - 2014 X10 SeriesCompact Utility tractorDaedong built X10 Series Compact Utility tractor Daedong built

Production
Distributor	McCormick Intl
Manufacturer	Daedong
Compact Utility tractor
Built in South Korea

McCormick Intl X10.55M Engine
Daedong 2.2L diesel
Fuel tank	18 gal 68.1 L
Engine details ...

McCormick Intl X10.55M Transmission
12-speed synchronized shuttle
Transmission details ...

McCormick Intl X10.55M Power
Engine (gross)	54 hp 40.3 kW
PTO (claimed)	45.2 hp 33.7 kW

Mechanical
Four-wheel drive
Differential lock	rear standard
Steering	hydrostatic power
Wet disc brakes
Two-post ROPS. Cab optional with air-conditioning and CD-player.

Hydraulics
Type	gear pump
Valves	2
Total flow	14.21 gpm 53.8 lpm

Tractor hitch
Rear Type	I
Control	position and draft control
Rear lift (at 24"/610mm)	2,654 lbs 1203 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	75.6 inches 192 cm
Weight	4795 to 5180 pounds
Front tire	9.5x20
Rear tire	14.9x28
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 134.1 ci / 2.2 L Diesel

Manufacturer	Daedong 4A220TLWB
Configuration	turbocharged diesel, liquid-cooled vertical inline
Displacement	134.1 ci 2.2 L
Power (gross)	54 hp 40.3 kW
Rated RPM	2600
Starter	electric
Starter volts	12

Transmission

Transmission — 12 forward and reverse synchronized shuttle

Type	synchronized shuttle
Gears	12 forward and reverse
Clutch	dry disc

Dimensions

McCormick Intl X10.55M Tires
Ag front	9.5x20
Ag rear	14.9x28
Lawn/turf front	29x12.5-15
Lawn/turf rear	44x18-20
Industrial front	14x17.5
Industrial rear	18.4x24

Dimensions
Wheelbase	75.6 inches 192 cm
Length	130.5 inches 331 cm
Width	69.3 inches 176 cm
Height (ROPS)	106.5 inches 270 cm
Height (cab)	99.6 inches 252 cm
Weight	4,795 lbs (ROPS) 2175 kg
	5,180 lbs (cab) 2349 kg
Ground clearance	17.5 inches 44 cm
Front tread	57.5 inches 146 cm
Rear tread	53.9 inches 136 cm

Photos

McCormick Intl X10.55M tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl X10.55M based on its 54 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl X10.55M.

Estimated Continuous Field Runtime: 6.4 hrs

Approximately 6.4 hours of continuous field operation at ~75% rated power on a full tank (18 gal / 68.1 L).

Estimated 75% Load Fuel Burn~2.8 gal/hr (10.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours