McCormick Intl X6.440

The McCormick Intl X6.440 is a tractor produced by Mccormick Intl. It is equipped with a 274.6 ci 4.5 L engine. The listed engine power is Diesel (listed): 130 hp / 96.9 kW. Transmission: VT-Drive. Operating weight: 10362 lbs 4700 kg.

Engine Power

Diesel (listed): 130 hp / 96.9 kW

Fuel & Capacities

47.6 gal 180.2 L

Transmission

VT-Drive

Operating Weight

10362 lbs 4700 kg

Overview

	2014 - X6 Series
2014 -
X6 Series

Production
Manufacturer	McCormick Intl (a part of Argo)

McCormick Intl X6.440 Engine
BetaPower 4.5L 4-cyl diesel
Fuel tank	47.6 gal 180.2 L
Exhaust fluid (DEF)	6.6 gal 25.0 L
Engine details ...

McCormick Intl X6.440 Power
Engine	130 hp 96.9 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic
Power steering
Wet disc brakes
Cab standard with air-conditioning. Climate control and air-suspended seat available (standard on LS). Mechanical cab suspension available on LS.

Hydraulics
STD Type	open center
LS Type	closed center
Pressure	2900 psi 200.0 bar
Valves	3 to 5
STD Pump flow	17.4 gpm 65.9 lpm
LS Pump flow	29.1 gpm 110.1 lpm
Steering flow	10 gpm 37.9 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift	11905 lbs 5400 kg
Front Hitch	II
Front lift	5512 lbs 2500 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic wet disc
Rear PTO Type	540/540E
	540/1000
	540/540E/1000/1000E
Front PTO	independent OptOptional
Clutch	electro-hydraulic
Front PTO Type	1000

Dimensions & Tires
Wheelbase	100 inches 254 cm
Weight	10362 lbs 4700 kg
Front tire	480/65R24
Rear tire	540/65R38
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 274.6 ci / 4.5 L Diesel

Manufacturer	BetaPower
Configuration	turbocharged air-to-air cooled diesel, 4-cylinder 16-valve, liquid-cooled
Displacement	274.6 ci 4.5 L
Bore/Stroke	4.09x5.20 inches 104 x 132 mm
Emissions	Interim Tier IV
Emission control	selective catalytic reduction (SCR)
Power	130 hp 96.9 kW
Maximum Power	140 hp 104.4 kW
Fuel system	electronic high pressure common rail
Rated RPM	2200
Torque	425.6 lb-ft 577.1 Nm
Torque RPM	1500
Starter	electric
Starter volts	12

Transmission

Transmission options
36-speed three-speed power shift
48-speed creeper
continuously variable transmission (CVT)

Transmission — Xtrashift

Transmission	Xtrashift
Type	three-speed power shift
Gears	36 forward and 12 reverse
Clutch	wet disc
Four gears in three ranges with three-speed power shift and power shuttle.
Type	creeper
Gears	48 forward and 16 reverse

Transmission — VT-Drive

Transmission	VT-Drive
Type	continuously variable transmission (CVT)
Gears	infinite forward and reverse

Dimensions

McCormick Intl X6.440 Tires
Ag front	480/65R24
Ag rear	540/65R38

Dimensions
Wheelbase	100 inches 254 cm
Length	173.2 inches 439 cm
Width	80.9 inches*Minimum 205 cm
Height (cab)	110.4 inches 280 cm
Weight	10362 lbs 4700 kg
Ground clearance	16.5 inches 41 cm
Front axle	Hydraulic suspension

Photos

McCormick Intl X6.440 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl X6.440 based on its 130 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl X6.440.

Estimated Continuous Field Runtime: 7 hrs

Approximately 7 hours of continuous field operation at ~75% rated power on a full tank (47.6 gal / 180.2 L).

Estimated 75% Load Fuel Burn~6.8 gal/hr (25.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours